High Frequency Large Horn Cabinet
Ask a question about this subject?
Post a question direct to our forums and get mailed when a reply is added!
There are 7 viewer comments posted to this page - Read
Author: admin
Date: 05-Sep-08
This high frequency large horn cabinet is ideal for a modular system... If you want to get more ambitious, you can go for a modular system, with seperate bass, mid and treble cabs... each frequency range has it's own power amp, either a stereo amp, or 2 mono ones. The frequencies are split after the mixer, by an active cross-over (powered), which is best for systems over 500W per per cross-over (frequency).... You can tweak the active cross-over at the venue to 'tune' the sound a bit more...
This cabinet requires a passive cross-over inside to split between the horn and the bullet tweeter..... Check with the supplier for appropriate cross-overs and wiring when you purchase the driver units.
| LOUDSPEAKERS | HF FLARE WITH 1 OR 2 DRIVERS BULLET TWEETER |
| PERFORMANCE | From 1.2KHz to 20KHz of smooth clean mid and treble Sensitivity of 100db for 1 Watt at 1 metre |
| CONSTRUCTION | Fairly simple. fairly simple this one |
| MATERIALS | 2/3rds of a sheet of 18mm / 3/4" 8' X 4' board (2438 X 1219) |
CLICK TO VIEW & DOWNLOAD THE PLANS
[plans will print out to an A4 page]
CLICK TO GO TO CONSTRUCTION TIPS PAGE
(very important to read this !!)
Good luck & happy building!
COMMENTS FOR:
'High Frequency Large Horn Cabinet'There are a total: 7 comments posted to this page.
Name: Mike Jacob
Email:
Activity: Hobby-ist
Date: 30-Dec-99
I am making cabinets for my guitar playing kids (14, 10, 10, & 9) to use in their band. These look like good plans. Could they be used directly hooked up to guitar amplifier heads? I have downloaded all the plans which you have put on the site. Can you recommend which ones to use for the guitars?
Thanks.
Mike Jacob
Article rating out of 5:  |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: Simon
Email:
Activity: Hobby-ist
Date: 30-Dec-99
I tried to send comments about the 1x15" scoop bin, but was unable to I'll add it to this. It is truly a great design, but I am interested in building an 18" version, can anyone give me advice on any changes that would need to be made to the cabinet design? I am planning to use the Celestion BX18 600w 30-300hz speakers, wise choice?
| Article rating out of 5: |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: Simon
Email:
Activity: Hobby-ist
Date: 30-Dec-99
Could I make a similar cab using a compression driver and relative horn?
| Article rating out of 5: |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: john raul
Email:
Activity: Hobby-ist
Date: 03-Sep-06
how can i get a cerwin vega el36 designs?
Article rating out of 5:  |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: shepherd
Email:
Activity: Professional
Date: 02-Apr-12
verry good
Article rating out of 5:  |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: gdsjsjsj
Email:
Activity: Professional
Date: 24-Sep-14
I don't think I can finish it.
Article rating out of 5:  |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Last added comment
Name: guitar amps cabinets
Email:
Activity: Professional
Date: 24-Sep-14
Think that to make a better cabinet is difficult.
Have all the cabinet got the same size like this.
I think I will have a try to make one myself.
It will be terrible work.
But I like it.
| Article rating out of 5: |
Article 'ratings' were added September 2008, so most articles have no viewer rating
'High Frequency Large Horn Cabinet'
Note: To cut down on spammers, cookies must be enabled to post comments to this page.
[back to top]
