 |
 |
 |
 |
 |
 |
 |
Forums - Drums / rhythms / programming
Subject: Drum Sub Groups
Original Message Date: 17-Sep-02 @ 02:13 PM - Drum Sub Groups
Drop
Posts: 1128
Link?: No link
File?: No file
My question is about grouping drums through a compressor.
My kick and bass are shoved through seperate compressors. Then I send the rest of my drums to a seperate compressor.
At the moment, I send the drum track (not kick) to groups 1 and 2 on my makie and have the main L&R switch on each track I'm sending to the compressor up.
The thing is that I want that pumping compression going on and to do that I have to send the kick to the same compressor as the rest of the drums. To do that, I need to send the kick but when I lift the L&R switch on that channel, the signal is not going to the kicks individual compressor.
Do you lot have the desk returning a mix between the compressed and uncompressed drums or do you just monitor the compressed drums via sub group 1 and 2.
Not explaining this well but hopefully you get the drift. Thanks.
Message 11/11 18-Sep-02 @ 05:43 PM - RE: Drum Sub Groups
Drop
Posts: 1128
Link?: No link
File?: No file
Don't be angry with me Milan.
Pages: 1 2
There are 11 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum
