If your pickup/control wiring is broke or disconnected, here's some diagrams showing how they should be wired
acoustic + microphons +types
acoustic
microphons of types
loud speaker
Any diagrams for a gibson humbucker and a single volume knob? cheers!
hi,
help. i have a bass ,fender, i have
fitted two pickups. one neck one bridge. want to wire neck bridge p.up.
just as volume i.e all bass,,bridge p.up through volume and treble control
is this poss.
thanks dave
Pleas eif anyone has any information on making your own guitar amplifier, send it my way, i wanna start from scratch and make cab and head, all technical information needed!
Cheers Chris
Hi,
I'm just starting out learning guitar and have bought a Wesley six string with a bridge humbucker and two single coils. My question is simply can anyone tell me which pickup combinations are selected on each of the switches five different positions? Thanks in advance!
Andy
How can i wire all three pickups to lower tone control on strat?
What do you call a bass that has both P and Jazz type pickups? I'm looking for a wiring diagram for a National Bass with EMG Selects in it. It has 3 pots, at least one is volume of this im sure lol, but is the 2nd one for blending the pickups and the 3rd for tone? Or would it be two volumes (one for each pickup) and a tone?
hi, i recently got a cheap guitar to get the pickups out of, but one of the wires' soldering has come undone, the guitar has 2 dials, and a switch, one of the dials can be pressed in, the white wire is the one unsoldered and it leads to the buttoned dial... do you know where i should solder it
Helping my daughter build a Les Paul style guitar out of Corian. Am not sure how the springs are to be attached to the pick-up. Are there any diagrams out there? I only see wiring diagrams.
Thanks
I'm replaceing the pickups on my LP,the old pickups have lower ohms reading then the new ones. -Q The lower the ohms the "CRISPER" the sound ?
Do you have a Telecaster wiring diagram?
I want to have Neck only , Neck and Bridge in parallel, and Bridge only?
Thanks,
Rick Lonardo
I was wondering if you knew how to put a humbucker in the bridge position of a Squier strat, and without wrecking the pickgaurd.
I have a Pacifica with a H/S/H configuration. The bridge humbucker has parallel/single/serial options. Problem is the single coil in the middle position is out of phase with one of the humbuckers of the other one, depending on how I wire the polarity. How can I get an in phase sound from both the 2 and 4 positions on the pickup selector switch?
David
I have a Pacifica with a H/S/H configuration. The bridge humbucker has parallel/single/serial options. Problem is the single coil in the middle position is out of phase with one of the humbuckers of the other one, depending on how I wire the polarity. How can I get an in phase sound from both the 2 and 4 positions on the pickup selector switch?
David
I am doing a school project of how an electric guitar works. I wanted to have a demonstration of how the pickup works and how the motion is changed to energy. I got a magnet, copper wire, a volume control and a jack but when I pluck the string no sound is made. It doesn't have to be good I just want to make sound. Can I do this with the tools I have? Do I need a certain size magnet/certain number of winds in the coil? Any help would be great. Thanks, john
Hello I have just added screw adjusters to the bridge p/u of my '66 F. telecaster and now I have ne signal to that particular p/u. The nect p/u works fine. Have I shorted the p/u out by connecting to the bridge plate with the screws?
Any help would be appreciated!
Thanks Martin
hi i need the wiring diagram for a encore guitar 2 pickups and 2 volume controls thanks keith
My Strat dramatically loses high end
when I back the volume knob off,
even a little bit.
This renderes the volume knob
useless and forces me to use a
volume pedal.
I'm told there is a trick involving a
capacitor. Any advice? Thanks, Dave
I'd like to have the pick-up wiring of a JT-700
I need to setup my LP neck coil with a "dummy" hum
canceling coil. Do I pull the magnets & pole pieces and just
wire it like a conventional huumbucking? (phased/series)
How close to the neck coil does the dummy need to be to be
effective?
Thanks
Ge
I have a Bartollini bass pickup it has three coils one for noise cancelation, it is a music man replacement it has a black, orange,red, blue,white,green, and a bare wire no one can tell me what wire goes where, any info would be greatly appreciated.Bartolini has no support of any kind.thank you
Looking for a wiring diagram for mixing an active humbuck with a passive humbuck using a 250k push pull pot as the on/off switch for the active. any help would be awsome!!
I have a thinline tele and put a dimarzzio hotrail at bridge it sounds great but is microphonic ..i replaced it with a fender noiseless and its still microphonoc any ideas? the neck pickup is a seymor and is not microphonic i did change the bride saddles from 3 to six ....thanks j
I need to get help on the diagram fo my hammer guitar.
I has two single coil pickups and a humbucker pickup, and a 5 way switch with another little two switch for for the tone. It has a volume knob and a bass/treble knob, I need to be able to rewire it can you please show me how the wires are connected?
Thank you.
I have a b.c.rich warlock style with 2 humbucking pickups, with 3 pots and 3 toggles. the 3 pots are both 500,000 ohm, and i have 3 on/on/on switches. COuld you send a wiring diagramplease and any helpful hints would be greatly appreciated. Also is there anywhere else to ground the wires except the saddle or the plate where the springs connect to the tremelo? Thanks for the help.
Q: I want to tap a humbucker style pickup that has only two wires coming off of it. Hot and ground. Can I solder more wires into it and at which points on the coils?
Im looking for wiring diagram for guitar that has 1 emg select humbucker, two factory singles, a 5 way slide switch, a volume, 1 regular tone, and a tone way tone knob. Any help ican get is appreciated.
I need schematic for:Dual coil split pickup going to 1x vol,1 x treble and 1 x bass controls.(Passive),No switches,4 string Bass.
Thanks
Is it possible to wire a 3 pickup setup (mine happens to be HSH) to get all of the following combinations? 1) bridge 2) middle 3) neck 4) bridge+middle 5) neck+ middle 6) Bridge + neck 7) bridge+middle+neck?
Thanks
I intend to install an onboard Roland midi pick up on my Fender Jaguar. Please can you let me have a wiring diagram.
many thanks
Phil
Im after a diagram of 2 humbucker pickups,n 1 single, all be diffrent pickups with a switcher and a lead, rythym switch on, also volume and to tones. Its for my guitar im making.I want to use a telecaster single coil and two diferent types of humbucker. any idea cheers
hello, I have an 1968 Aria diamond model 5102G (Gibson ES335 copy) with the twin humbucking circuit.With only 1 volume and 1 tone control. I would like to remove the 3 position toggle switch and add a 5-way rotart switch. Do you have a print for this?
Thanks
Jerry
I need a diagram for wiring an EMG 81 directly to the EMG provided jack. i.e; no switch's, tone or volume controlls. Thanks and the site rocks. Chris J.
I have bought a tele 4-way switch, but when I wired it exactly like the wiring diagram I had only 2 selections the first 2 positions were both neck & bridge pickups & the next 2 were just the neck pickup. HELP!!!
i have to change out the volume pot on my 1985 esp model no 487. the only problem is i want the sound of the fender vodoo strat but i can't find any wiring diagrams to fit my pickup setup which consist of (2) single and (1) humbucker (1) volume and (2) tones i'm desperite to get my guitar going again e-mail me with any news or diagrams available.
I have a TKE 5 way strat switch I got from a friend all the solder points are inline and there are only 7 unlike the Squire switch that has 8 connections inline. I have tried to wire it several ways and cannot get it to work properly. If anyone knows where I can get a wiring diagram for a TKE strat switch I would apreciate it. Here is a link to a picture of one. http://www.soundchamberrepairs.com/frames.htm
Have a Yamaha Pacifica 102S Tele & bought
Fender Tex-Mex Strat Neck & Tex-Mex Tele
Bridge p'ups which don't have bottom
plates/magnets w/ground wiring, just two
leads, hot & ground. Want to try the
(Yamaha) 5-way switching. Have several diagrams showing re: standard Tele p'ups,
but need some input. Thanks
how do you wire twin humbuckers neck and bridge with a Fender Lace TN-100 3 wire model in middle position to a Fender 5 way selector switch on a Fender Stratocaster?
any clues!...hoping for a solution.
Thanks,
Lee Hodson.
I have a squire type-switch and i don't understand how it works: what means the number on the pole (1 to 7)?
How can i compare the draw whith the real hardware?
Thanks a lot and sorry for my english :-)) !
If I want to get rid of a tone knobs and just have a volume, which wires do I snip?
I'm wondering about the twin humbucking circuit. The toggle switch allows to select the bridge or the neck pick-up or both (in middle position).
Is it possible to wire this circuit without toggle switch ? How ??
do wiring two humbuckers in parallel have the same amount of output/volume of one humbucker? Thanks in advance.
I have a les paul dc and i am trying to install a duncan sh-8 in the bridge position but i cant figure it out. Do you have a diagram of how to do it? The instructions provided might as well have been in spanish i cant understand them. Please help--John
I have a quiestion a bout a mod i want to make, I bought ! sh-6 humbucker, 1 live wire classic single coil and a Paf Joe humbucker , My guitar is a ibanez Rg With 1 5way PU selector, and I wanted to add a second 5 Way Pu selector, will this work?
just wonderin' if anyone had a diagram of how to wire a emg-81 into a fernandes monerey elite guitar with a sustainer.
If only I had these diagrams when I built my first guitars in 1973 (Les Paul) & 1975 (Strat). I was close!
Got here from your Red5/Akg comparison- The AKGs sound terrible specially the Toms, but the kick is poor too. I have the RDV1 as well but was initially disapointed - expecting a really precise accurate sub to it like a large condensor. We now mix it with a little amount of Tandy PZM inside the drum on blankets, with the low mid punch from the RDV1. I have got good results from the back next to the beater on some kits, but often theres too much snare rattle.
Happy Dancing
Andy
is it possible to put an EMG 81 and an EMG 85 with a 5 way selector. cause all the schematics ive seen for these pickups all have included 3 way. my LTD M-200FM includes (at the moment)
2 humb (EMG H4's), 1 vol 1 tone, 5 way sel
any ideas... thx kyle
I just buyed a Fast Track pickup, what I want to do
is combine the Fast track pickup wich has 4
connector with the two single coils original from
the Standar Strat these have 2 connector I need the
wiring diagram to do this
Can you draw me a diagram, or explain in detail how a person could rewire their les paul so its nothing more than a humbucker going to a volume knob, then straight to the output. Thanks.
-steve.
Hi Do you have any pickup diagrams for Jackson Guitars.
can someone mail me a diagram for one
humbucker and one volume,no tone?
Is it possible to wire all the pickups in a Squier Strat together so that they can all be used at the same time? If this is possible, how can it be done?
Thanks
I need a wiring diagram for a SG junior, could you help me?
the wiring diagram for a bass guitar with 1 pickup ans 2 switches
I was just curious if the wiring of a Fender Squire is the same as the american or mexican versions. And also if the pickups are vastly inferior. Do you know what the range of resistance in these pickups are... strats and teles. Thanks
how hard it to replace old pickups with EMG's?? cheers
Rory
I have a Squire strat, and wanting to replace the 5-way selector switch. The one that was sold to me is a new'er Fender replacement, which has the pins split to each side. The old one are all on one side and is a standard switch for the squire. The guy at the store said this new'er one is a better switch. And he was not very clear as to rewiring it.
Required Wiring diagram for
2 humbucking pickups and 1 single coil pickup
I just got a loaded pickguard. I don't know how to hook it up. There are 2 wires coming off the pickguard and 2 wires coming off the output jack. But what about the 2 ground wire's? please help me. Thank you. Leonard
can i have specific instructions on how to wire a jackson guitar
Hi, i have an earth cable that is not connected to anything and i get lots of buzz. The cable is soldered to the springs at the back and is routed thru into the electrics bit, but i can't see where its supposed to go? Also i only have one connection to the cable jack socket. I get a buzz which gets louder when i touch the strings. I need some help !!! its a 10 yr old 3 pickup mex strat.
Thanks,
Greg
I have an Ibanez am73 Artcore series semihollowbody with two humbucking pickups. All of a sudden I am not getting the sound of both pickups when the toggle switch is in the middle. I get only one pickup. Any idea as to what could be the problem? Due I just replace the toggle switch or could it be something else?
I have a 73 Standard blonde tele and I get a hum that stops when I touch the volume pot. How can I ground to eliminate the hum. I tried to ground by soldering a wire from the volume pot to under the bride but that increased the volume in the bridge pick-up and made the middle and neck pick-up sound the same with less volume. Do you have a diagram for this model.
Thanks,
Mike
can i split the coils of a EMG-HZ soapbar and how do you have the wiring option or diagram of it. thanks.
please could you send me a description of how the twin humbucker circuit works and what does component what, if possible please include a labelled diagram,
thankyou very much
jimmy
Hi there. Need some help with my Encore guitar. I have reshaped the body so that only the humbucker can be fitted. I need to wire this to a volume control and a push/pull kinda tone control, but I can't find the color codes for this pickup: RED - BLUE - BLACK - WHITE. Can anyone help me with this problem?
do you have a wiring diagram for a jackson
concept guitar?
it has a five way switch.
I'm Looking for a SWITCHEROO wiring diagram of Tom Anderson Drop Top
Could you send me by e mail?
Thanks you very much
Texas special bridge pickup ! which is hot which is ground? Also others have red/black yellow/black white/black PLease help! THANKS RON
I'm a newbie taking apart my (Mexican made) strat...I did change the pick guard, but am worried about wiring. Bought a seymour duncan humbucker and want to wire it in the bridge position...it has 4 wires inside the shielded wire - red, white, green and black, plus a bare wire. the old pickup only has a black and a white wire - can you tell me how to correctly connect the wires?
i have a bc rich warlock with just vol tone and the 3 way switch i need to put in my new gibson humbuckers and i know they are normally used with a 4 knobed guitar how can i hook up the gibsons to the warlock any way is great.....thanks
hey guys, i've got a Jackson DKMG Dinky with 2 emg-hz's, one volume, one tone, and one "signal boost" knob. I want to put an EMG-81 in the bridge and was just wondering if you guys could tell me how i would go about it. Cheers
can you give me a diagram for installing tele texas special pickups
I just purchased an old alpha les paul copy. The wires are completely disconnected from the pots. It has two humbuckers and four knobs and an input. No toggle switch. I'm assuming the knobs are for volume and tone. Can these be wired without the toggle, and how? Would the volume knobs be independant? Any help would be great. Thanks.
Hi,
please could you help me find a wiring diagram for an Aria LB650 Pro 2 copy of Gibson grabber bass guitar, 1977-1980? I would really appreciate it?
Many thanks,
james
I have a 3 pickup Start it is a H-S-S setup. I need help making a wiring diagram for a idea I have. I want to use a push/pull pot 250/500K for the Duncan JB Jr. in the bridge, to get single and full humbucking settings.
I want to use a old sstyle Fender 3way switch to wire up only the Bridge and Neck pickups to it. I I want to wire the Middle pickup as ALWAYS ON ...by using the 2nd tone control as a seperate volume control wired HOT.
if anyone has any ideas or can helpin anyway, it would be greatly apprecited.
I would like to wire my bass vol/blend/tone/tone (one tone control for each pickup). it has two humbucker pickups and is passive. where can I find a wiring diagram for this configuration? any help would be greatly appreciated!
i see your jack socket has 3 i think it's leads on it yet one is lose why?
Me and my dad have just finished refurbishing a bass and we are not sure how to wire the pickups and knobs and things, can anyone give me a detailed diagram? there are two pickups wired in series, two knobs (volume and tone) and a jack.
Many thanks in advance
Andrew
Hi
Have a Fender Squier Bronco bass, single pickup. Stopped working. Opened it up. White wire from pickup flopping around. Looked like it should go to the volu me pot, B500k ohms, 3 terminals, looks like i t broke off from the end terminal that has a jumper to the body of the pot. Soldered it back, but it no work!
What to do?
Thanks much if you can help!
I bought a jackson dkmg dinky guitar and i bought some emg 81/85 pickups to install in it. Is there any way I could get a diagram of how to install these pickups? I would greatly appreciate it!!
prs pickup wiring please? thnx
grat diagrams but i am in the process of re-wiring my very frist guitar and wondered if you could give me some tips and secondly a diagram for a simple 1 humbucker set up with no switch am good with electrics but never done anything to a guitar before apart from play
where do the springs on single cols go?...took apart a
n old strat and cant seem to get the height
posistionen?...
Thank you so much for your diagram on Gibson Twin humbucking circuits. I own an Epiphone Sheraton II which is a copy of Gibson ES335 so I would assume that it is wired the same. I recently plugged my amp cord in to the guitar jack socket and now I have a loud humming sound and no sound from the guitar. I've been told that this is a sign that one of the wires hooked to the jack socket has disconnected. I plan to have a professional repairman fix it for me. I've also been told that all the wiring has to be removed to repair this problem. I wanted to see how this wiring works and was glad to find this diagram on your website. Thank you again
I need wiring tbx control (passive bass treble for guitar) please
thanks
Hi,
I wonder if it is possible to wire a 5 way switch on a strat so that in the bridge position, the bridge and middle pickups would be in series (humbucker style)
thank you
hey i have a esp Viper-100 and i have 1 volume and 1 tone nob and a 3 way switch can you help me??
I am looking for wiring diagram for a epiphone les paul special with 2 humbucking pickups and only 1 volume and tone pots. Also a similar guitar with 2 volume and tone pots
Thanks to all who respond
Looking for wiring for a Tele to allow a 4-position switch to be installed to give the option of both pu's in series.
Hello, I bought a set of Texas Special and I don't know wich color is for bridge, middle and neck. Someone knows?
Where should I put red, blue, and the other one?
Thanks.
i am looking for a Aria pro 2 wire diagram because i am trying to rewire my guitar
I need to find out how to wire a 1980 Fender Lead II 2 position phase switch. It is supposed to work with the 3 position switch set in the middle, and the 2 position switch would make the bridge pickup out in or out of phase. Any help would be appreciated.
Hi there i need to know how to wire two humbuckers with 2 volume 2 tone controlls with the two tone controls being push pull pots (or the volume controlls) i have looked and looked but i havn't been able to find a diagram with those specifications
I have a yamaha guitar with a straight to amp switch that I need to remove because its broken but the guitars electrical are a wee bit complicated and I'm basically stuck. please help
hi, i have a yamaha grx121s with two humbuckers one volume and one tone control i just wondered if anyone has a wiring diagram for this.
Thanks! ronnie
Hi,
I'm wiring an EMG81 into an ibanez guitar, i had 2 passive humbuckers and single coil, on a 5way switch, i now want an emg in bridge position, have you got any advice or wiring diagrams for that? thanks Dave
Require wiring diagram and pot/cap values for Fender Jazz Bass Noiseless pickups. Thank you
can you post a diagram on how to wire a humbucker to a strat? I just got one and I know there's a way but i can't seem to find a diagram
I have just brought a copy Gibson twin neck and the volume controls both give full volume between 8 to 10 and then virtually nothing below that...any ideas?
Thanks
Brad
hi there i am a guitar repairer/tech
if you need any help with electrics please feel free to mail me or call.
I just got a diesel metal shred pickup and they sent no skematics for the wiring it has four conductor black white red green, any ideas you could give me?
Need help with special wiring on a strat, Seymour JB Jr. BRIDGE ..Hot Stack MIDDLE.. Stock 2 wire strat NECK. I want to use a 250/500K pushpull pot for Bridge Humbucker, to be able to split to simgle coil. I want to use a 3-way TELE type switch on BRIDGE and NECK pickups, while running a seperate Volume pot MIDDLE pickup. just "1" tone control for bridge and neck.
i have a emg 81/85 setup in my epiphone sg and i get this annoying hum when ever i stop playing (even with my hand on the strings) it cancels out my note sustain on finger taps and pinch harmonics. Maybe a string ground I dont know please help! thanks!
i have aria diamond 1968 guitar and i wana pickup for my guitar wich pickup is good to this guitar?
I think I may be able to use the diagram you posted for the twin humbucking cicuit above just modifying it for the set-up (see below).
However, I am hoping to get a diagram for a BC Rich Warlock guitar I am fixing for a friend of mine. It has two humbuckers but he took the original one out at the bridge and replaced it with a Duncan-Seymore but he didn't wire it right and made a few soldering errors.
It is set up with three pots and a three-way switch. I think it is a volume pot for each pickup and one master tone pot because only one one has a capasitor on it.
Anyway the Duncan-Seymore has four wires, black,white,red, green, but also has a wire sheath around them which the last two are grounds.
Any help with a diagram would be appreciated
have you any wiring diagrams for a shergold custom masqueraider with 1 vol 1tone 3 3-way switches and 2 humbucker pickups? very much appreciate any info thanx-jp
I need a picture of a pickup caveity for a single cutaway 58 les paul jr , do u know where I could get a picture or diagram of this ??? thank you gordie
hi, i am a novice, when it comes to things like wiring and i ahve jst bought 2 EMG active pickups(81 and 85). i wondered if you have any hints or tips on istalling them for me because i don't know what the hell i am doing.
Help!!! I've bought an ARIA PRO II EXCEL ( XL CST 3)in bits and I've gotta try and put it all back together. The wiring is were I need help. Can anyone tell me where I can get a wiring diagrame for this guitar. It was made in the early 90's.
Thanks.
I need a diagram for a tremonti se. it appears the same as a les paul single cut. Is it? I have 2 for the lp and they are different. Ive also replaced the pickups in the tremonti to a jazz neck and a jb on the bridge., Im strickley a novice so I took it to or local guru. got it back today and the bridge is oozing with power and the neck is real muddy and lacking power as is the two together.I have a sodering iron and thought id fix it myself;with a little help. I would greatly appreciate any help givin; especially with lots of pictures and laymans terms
can I install tex-mex pich=kups on fender strat (mex) can u tell me how ?
Iam looking for wiring diagram for an ARIA PRO II - rs classic
Any help with this would be greatly appreciated
i have a epiphone special 2 with only one volume and one tone. do u have a diagram for that?
Hi,i need fender jazz bass'73 pickup impedance and spece,tanks,Kris
i have a BC rich guitar with, 2 BDSM Humbuckers and want to know if i can put EMG 81/85 pickups in will they fit?
Someone, please send me best wiring diagram for 2 humb. (Kent Armstrong Vintage) + 3 Way Lever Switch + 1 Volume + 2 Tone. Thank You.
I have an old yamaha pacifica guitar, much loved ... but it suddenly wont work ... it hamms when put through whatever device I ususally play it through ... any ideas what the heck happened? and what I can do to sort it out ... please
ps like the diag, have dismantled guitar and seen that one wired seems to be loose, have attached to a point i thought it may go, but so far no joy.
I have a Jackson that has a metal plate that the pots and switch mount to.
Being the pots and switch are grounded together by this metal plate, do I still need to have ground wires between the pots and switch? Would this not make for a bad ground loop?
THANKS!
I am trying to do up my old strat-style guitar. I have a pick guard with two humbuckers and 1 volume and 1 tone control. I'v never really fiddled with the wiring of my guitar until now and can't seem to find a diagram which explains where to put everything. It'd be great if you could help. Thanks
i recently installed an SD invader in my LP style Epiphone, in the bridge. All the connections for wiring were made into the 3 pos selector switch, as it was with the epiphone factory pickups, i have also installed a Bill Lawrence 500 xl in the neck. my problem is that when i play on the bridge pickup i have an amamzing amount of power but not a very clear tone , in comparison with my Ibanez, and ideas why? thanks.
Hi,
I just bought a D'Angelico Excel archtop, with two Kent Armstrong pickups. I also bought two Bartolini PBF 55 nad PBF 57. A would like to get a wiring diagram for them; there is a tone and a volume control, and a 3 position toggle switch.
Do you recommend some good electronics? I understand that good electronics are cleaning the tone. Can you suggest me what should I go for?
i was wondering just how to wire one humbucker to a sinlge volume knob and an imput thats ill i need if you can help please email me back thank you very much
Dustin
I HAVE AN OLD BASS WITH TWO PICKUPS AND I WANT ONE VOLUME AND ONE TONE CONTROL WITH A LES PAUL SWITCH WOULD YOU HAVE A WIRING DIAGRAME.
ALSO WOULD YOU HAVE A WIRING DIAGRAME FOR A FENDER STRAT TO HAVE THE BRIDGE AND NECK PICKUPS TO HAVE THE TONE CONTROLS INSTEAD OF THE NECK AND MIDDLE.
THANKS
NEIL
Can someone tell me where the ground wire goes for a vintage archtop, it is similar to a gibson 335, do i run it out the back and hook it to the saddle?
Thanks
I have a tele with a hot rear pup 14ohm I now want to put a humbuck in the front7.5 ohm Do I need to change the pot to a 500K and or the caps. thanks
I need a wiring diagrm for a Schecter Diamond Series S1-+. Thank you much.
I am thinking on purchasing a Fender deluxe strat with double hunbuckers, 3 way switch...can I put in a push-pull tone pot on either pickup and get the humbucker to switch from single coil to humbucker?? Maybe a 5 way switch to get more strat tones/single coil type tones?
Hi, I'm looking for a wiring diagram of the Yamaha AES1500. Any help would be appreciated. Thanks!
I need a wiring diagram for a 1965 gibson sg with two p-90s pickups.I would like to have one vol and one tone.
HELP? have attempted to fit a humbucker to a squier strat. Physically no probs but it has three wires large black a thin black a joined red & white, which goes to what? cheers for any advice Gary.
Hi, I was wondering if you have a diagran for wiring a single volume and single tone pot to two humbekers. It's for a 1978 Tele Deluxe.
Thanks.
Mark
The diagrams are great,, but i feel the wires should be colored for easier reading
looking for a wiring diagram for a vintage V940 active bass guitar, can you help me?
I HAVE A ENCORE SMALL ELECTRIC GUITAR WHICH I BOUGHT SECOND HAND.IT HAS TWO PICKUPS AND ONE VOLUME CONTROL AND A TONE CONTROL.I NEED TO CHECK WIRING. A WIRING DIAGRAM OF THIS WOULD MAKE THINGS ALOT EASIER. THANKS BAS.
is it possible to add a 4 way selector series to parallel to an american deluxe with noiseless pickups or a g@l asat classic.....thanks
i would like to know how i can install a push pull potmeter for splitting the bridge humbucker. the humbucker is a duncan-ibanez-bucker. there are 4 wires connected to the pickup (white-black-green-ground), the pot configuration is 2 volume, 1 tone. could anybody help me? thank you sooo much
Hi, do you have a wiring diagram for a standard two pickup Tele with a volume ,and tone control, and a two way switch? Basic standard. Thanks so much, Will
Hi, i have recently aquired a 1965 danelctro single lipstick pu model 4011 the guitar has a three way toggle but seems to do nothing when switched, the tone doesn't seem to change. all the wiring appears untouched and original. what was the function of this switch? Thanks,
david
i am wiring a twin humbucker cicuit on my epiphone. i was taking out the old pickups and volume and tone controls and there is a random wire going towards the centre of my guitar. i was wondering if that was that was the ground wire? and how it works? like is it just a single wire or is it attached to something in my guitar? hopefully you can help me.
thnx
hi i have 2 emg hz humbuckers 1 vol 1 tone 1 three way ther are 4 canections on the back 2 hot 2 neg where can i get the wiring diagrams
hi i was wondering if anyone has a wiring diagram for a gibson g3 grabber 1976 with the 3 pickups and a three way switch. thanks
i have a newer epiphone junior model k040902503 and the pick up wire broke. can i splice and soder them back together.
Can anyone supply a wiring diagram for a Yamaha Compass accoustic please?
I need a wiring diagram for:
A Dimarzio DP Evolution 159 Bridge
A Dimarzio HS-2 DP116 in neck
A Les Paul Type toggle Switch
One Volume control
No tone Control
I need diagram for Telecaster with 5 way switch mode and TBX tone pot. Thanks.
Hi I have a tele style guitar I want to put a Humbucker in the front,Can I keep the 250 ohm pot, or should I change it to a 500 ohm.
I'm looking for a wiring diagram for a rare Gibson S1 guitar. Only made for a few years it was Gibson's attempt to make a 3 single coil pickup guitar and I love the way it plays, but am having some grounding problems. Thanks for any insite.
I trying to start slapping together a les paul jr project. I need a book that gives me step by step instructions on how to wire three pickup, two pickup, and single pickup guitars. Not how to wire but also if i need to solder. If there is a book or a website that is purely dedicated to this subject, gimme some help.
Thanks
hi
i've got a problem, i've reacently made a telecaster an i've only got a 5 way switch, but 2 pickups. is it possible to use the 5 way switch insted of a 3? how? please send me a picture about that wiring.
thanx
z
If someone have the wiring diagram of the RS 850 Aria pro 2,can he send me,please.
I've got too many problems with my RS!!!
do you have a guitar wiring for 1 single coil pick-up and 1 humbucker pick up, 1 volume, 1 tone, and two on/on mini toggle switch(STDP). ANY BODY HAVE THIS KIND OF GUITAR WIRING PLEASE SEND IT TO ME.
i am building a tele that has 2 seymour duncan mini
humbuckers as opposed to the standard single coil
tele pickups. i want to put a push/pull pot in to
switch to single coil as well and was wondering if
you have a diagram for 2 humbuckers, 1 vol, i tone,
3 way pickup selector switch and a push pull pot
for either vol , tone or both.
thanks for your help.
josh
i need to know how to wire a 1980 fender lead 2, with 2 single coils, 2 mini toggle switches(on/off/on) and (on/on), 2 250k pots and the jack. PLEASE get back to me with somehing. ive been looking for almost year now.
i need the circuit for two humbuckers with five way selector,please,thank you
I bought a used Old Bill Lawrence humbucker that I want to install on an acoustic guitar that I own. The wires coming out of the OLB are red, green, white and black. How do I combine these wires to solder them to a female jack? Thanks.
Do you have knowledge of how to wire a fender strat using a pushpull pot for volume and afive way double pole switch?
hey, i have a project guitar with two signle pickups and a bridge humbucker but i hav no idea who to wire it all up, please help me! =(
jon x
looking for the EMG H-Z bass pick up wiring diagram for SPECTOR BASS. THANX
Hey everybody, I have a Jackson with an EMG 81
(which is an active pickup), and two single coil
passive pickups, it obviously has a 5 way toggle
switch and has two knobs for tone and volume. I
bought it used and the two single coils aren't
hooked up... Does anyone know the correct way of
hooking all this up? If you can, send me a diagram.
Thanks a bunch \m/
Thanks for your help i made a guitar but im not sure how to wire it
I have 1hb and 1sc , 1 tone , 1volume but my problem is I have a mini switch ON ON ON , with 6 place I can put wire so I didnt find no where how to wire this switch,,
Thank you very much for your help and advice,,alain cavalie
Hi,
I have an Ibanez rg560 from 1989 with 1 humbucker and 2 single coils. It has a 5 way switch, 1 vol. and 1 tone knob. I want to install a emg 81 and keep the singles. Can anyone send me a diagram on how to put this back together?
Thanks
i have a shadow electric guitar with a active pickup that has an equalizer on it this is only active when there is a 9v battery inserted in the back!!! the battery clip wire has snaped off have new 9v batt clip but were do the -&+ wire go??????? it has two normal pickups and the active one the bottom tone switch if pulled activates the pickup if you could help b very gratefull ???/ dan
i have 2 bc rich pups that look like EMGs how can i tell?
thanx
marty
I have a bartolini Hi-A pickup. There
are 5 places to attach wires, and I
cant find a wiring schematic for it.
It is sealed and I cant see where the
wires go, or what is inside.
Any clues where I can find the
schematic ?
I have an ohm meter. Do you know
how to test it and figure out how to
wire it for single, humbucker, in and
out of phase, ect ?
I have a Hohner B2A bass w/ two EMG pickups, a
switch which kicks in the 9volt battery for a boost
and a knob for tone... it's a double knob in one
which controls the tone for each pickup.
I can't find a schematic for this creature anywhere!
And the wiring needs work... any suggestions?
thanks.
I have a Hohner B2A bass w/ two EMG pickups, a
switch which kicks in the 9volt battery for a boost
and a knob for tone... it's a double knob in one
which controls the tone for each pickup.
I can't find a schematic for this creature anywhere!
And the wiring needs work... any suggestions?
thanks.
Im looking for a diagram to wire 2 emg 81's to a jackson king v with a 3 way toggle switch. please help!!!!
Im looking for a diagram to wire 2 emg 81's to a jackson king v with a 3 way toggle switch. please help!!!!
can you tell me where I can find the wiring d. for 3 single coil with one volume and one tone? Like the Febder squire set up. Not two tone controls.
Thanks
Steve
do you have Schematics for a fender strat s-1 sss
I have Ibanez JEM , bought in 2001. I've tried to
rewire it & change the bridge pup for Carvin
H22T. All JEM wirings differ, and dimarzio, and
Carvin too. Besides, my origional wiring doesn't
match any of it! I tried to wire it according the
blueprint and got a lot of noise. What to do?
Please, help me!!!
is there a set color scheme when it comes to the hot wire and the ground wire? Also what are all the other wires on a humbucker i see 5 on black on green a white and orange soutered together and a silver.
Hi there if you need any help with your wireing problems,setup,refret,repair or just some friendly advise give me a email or call.
details on web site
www.guitarrepairer.com
Hi
I'm trying to get inside my freinds Sheraton but I cannot get in through the pickups as they are blocked off. I've unscrewed the pots (one at a time) and they look fine but the neck pickup still won't work. the lead connection looks fine to.
Any ideas would be greatly appreciated.
Regards
David
Do you have a wiring diagram for an Aria Pro II Bass from the 80's? It has 2 soap bar pickups, 2 concentric pots, 2 three way micro swithhes, and to make it even more complicated, a 3 way selector switch! Who was the Einstein that put this together? Thanks for any help/advice. J.
Hi
I have a Yamaha Pacifica 12 string - 3 single coil/1 vol/1 tone + fiveway. I changed the pickups to staggered pole (Tokai) & now the fiveway has no effect, i.e. the same tone no matter what. Anyone have a wiring diagram so I can check it out?
Thanks
Looking for wiring diagram for Yamaha AES-800 electric guitar.
Do you have a wiring schem for an aria proII bass?
Thank you
Hi, Im Almir from Brazil and
would like to learn to make a linking of a captador of the seymor duncan model 59 arm with four wires, I wanted to make the linking for single with one potenciometro type push, this will be in the arm of the guitar that is a N4 washburn with one bill Lawrence in the bridge and a seymor duncan 59 in the arm. I have good knowledge of electronics but I do not have the wiring diagrams, would like to know if voces has possibility to help me. Thanks
If you change the capacitor how does the pick preception change?
what is the value of the vol and tone potentiometers on the web page http://www.dancetech.com/aa_dt_new/articles/item.cfm?threadid=153&lang=0
I need a wiring diagram for a Epiphone SG Special. it has 1 volume and 1 tone controls and 2 humbucklers and 3 way toggle switch. thank you for your help this matter.
how do I convert my double pickup Gibson ES 175 into a single [rhythm] pickup guitar? I need somehow to disassemble the whole toggle switch mechanism and remove the lead pickup together with its pots.
Need help with univox hiflier elect. guitar wiring diagram
Hey Guys! I'm trying to get a descent and accurate diagram on installing 2 bill lawrence pickups in a vip body with 1 volume and 1 tone control with a push/pull pot on the tone control for coil splitting, can any body give some advice
Hi, has anyone got a wiring diagram for a strat deluxe HSS S1 switch .the one on the fender web site is unclear many thanks
How do you replace a pot or switch in a hollow bodied arch top guitar when they are crackling.
Thank You.
I will be installing Fenders "Samarium cobalt Noiseless" pickups in my American Standard Strat. I've read I should install a .001 capacitor to keep the sound "clean", when rolling down the volume control...??? This is at the volume conroll itself, but I'm not sure how (and where) to properly "install it? I read "to the in and output lugs of the volume pot". Does this mean ONE capacitor ACROSS those two lugs, or TWO seperate ones at the input and output respectively? I would appreciate any comments someone can offer. THANKS!!!
hi, I recently removed a single coil off my washburn and want to replace that with a humbucker. What I wanna know is if the wiring is still the same or is it different where I need to soder it? Thank you
-Rudy
Matt Ryan Guitar Repairs, setups, refrets, headstockbreaks, elecs, pickups.
any wireing problems give us a call or email.
I removed the pickup and guard on my Mex Strat and found a loose wire originating in the springs in the back.
Any ideas wheer it goes?
I have a single suspended Kent Armstrong pickup on my guitar. I have a volumn control and wish to add a tone control. I have diagrams for doing this - two different ones. Can you suggest the proper wiring? I can be more specific ie: fax or email two diagrams;
I have an old charvel jackson one pick-up. I took it apart a couple of years ago. My 10 year old son wants to play it. I do not know how to wire it anyone can help us out. Thanks
i need schematic to fix di marzio dp 100 on my fender type gt
Is the wiring configuration for noiseless pickups for a Strat the same as the wiring diagram here? I cannot find any instructions anywhere! thanks, and cheers from Canada. Rob
How do you put the humbucker back into the guitar?
Hi, I'm looking for a wiring diagram for 2 humbuckers 2 volumes 1 EMG AB-afterburner and 3-way switch. The pickups are passive Epiphones, I dont want any tones aside from the Afterburner. Thanks
i hacked my wireing switching a double coil with a obl humbucker in my neck position and need a scamatic for wireing .the obl has 4 wires insted of the two that a standard has..if you can help then you could be my new hero
Dear sir
I need biassing capasitor microphon circuit, my microphon has only 2 (phase and noutral) for bias,it is very kind of you if you ansver my question,
Thanks
To replace the Humbuckers do you need to remove the Pickups allong with the two vol and the two tone plus toggle switch?.
I'm terrebly sorry I just send an E-mail regarding how to replace the Humbuckers but I did not tell for waht guitar was and is for Gibson ES-335 so I don't really know if to remmove the Pickups How or to loosen the vol and tone pots to get to the wiring, I don't have much Idea on how to do it, THX.
HI I HAVE A B.C. RICH WARLOCK I SETUP THE EMG 81/85 BUT THERE SOMETHING STRANGE CAUSE WHEN I INSERT THE INPUT JACK COMLETELY TO THE GUITAR THE PICK UPS DOESN'T SOUNDS BUT IF I PULL IT A LITTLE BACK LIKE 1CM AND IT'S SOUNDS WHY IS THAT? THE ONLY CABLE THAT IS NOT CONNECTED IS THE GROUND FROM THE GUITAR CAUSE IT WAS WRITTEN IN THE MANUAL... SO CAN YOU HELP ME OR SEND ME SOME PRINT OF HOW TO CONNECT THIS OR SOMETHING...? THANKS I'LL APPRECIATED
Any wiring diagrams for a 1980 Fender Lead 2. Thanks
Am re-wiring a re-issue Danelectro Double Neck
12/6. Neck selector switch is bad. Want to try and
get more out of two Lipsticks per neck. Want to use
Two Kent Armstrong toggle to select neck and
change phase. Then feed a Danelectro Select-O-
Matic rotary to mix the two pickups. As the rotary
can han dle three pickups, am putting a piezo
network of 4 pickups inside the hollow body.
Anyonw have an wiring diagrams of Select-O-Matic
guitars?
Please, Someone has a diagram or a photo of the electonic of a Shadow guitar s-140, the one with an active humbucker eq5, a piezo bridge and five knobs? I don't know how to repair it!
please help me, i am trying to wire up a lace tn-100 tele neck pick up to a 4 way selector switch, but i just cant do it.i've been told there is a small ground wire(which i see on other tele neck pickups) which i need to sever,from the chrome cover,but there isn't one there,i'm desperate for help,cheers Neil
has anybody got a wiring diagram for a bc rich warlock?!? ive got one and all of the hardware needs replacing and i dont know how to re-wire it! HELP
i just bought a set of te-x-as specials for my strat..there was no diagram in the packaging and i don't rerally know what pickup goes where...one had a black and a yellow wire which i think is the middle pickup the other had a red dot underneath and the other a blue dot...any help here??
hi, my name is ellis i want to know how the 3-way toggle pickup selector, with custom center position configuration of the john petrucci guitar work and if i can modified one 3-way toggle switch at home thank you
I am in need of the wiring schematic for two j bass noiseless pickups. I need the schematic for the very thin copper wires that come off the coils and where they go on the four terminals of each pickup. I don't need the schematic of how they wire up to the pots.
Have an Epiphone 335 Elitist, with Gibson '57s and an electronic HUMMM to boot. I have tried different layouts and pots. The hum is still there, any ideas? Thanks
please tell me how to wire a simple single pickup onto my guitar
its a single pickup not humbucker. one volume knob. it originally had a switch so i think theres an extra wire
please help i need to fix this soon i have a show tomorrow
could you help me with correct wiring the dimarzio dp100 hambucker?
Fender noisless neck pu,
When i try to install a fender noisless neck pickup on my strat it sounds week and low. I tried to change the wirings on the pu so that the hot wire goes to the pu switch and gruond to vol. pot, without any help. The middle pu is a fender usa standard and the bridge is a fender noisless pu.
all positions sounds fine exept the 5th position, why is that?
Please help!
What kind of humbucker wiring is the best for JEM77 neck pickup. I bought new Breed pickup and want to know which one is the best.
Thanks
I have an HSH with a 5-way switch. It is an older Yamaha. I can't find any diagrams for it as it is weird and none of the wire colors are in the diagrams I've found. Any ideas?
Hi, can you please send me a diagrame of how to replace emg 81 active pick ups with gibson les paul humbucker pick ups , many thanks
Hope u can help. I have a strat with 2 Seymour duncan mini humbuckers with a single coil in the middle with 1v 2t and a 5 pos slide switch do u have other wire diagram then with red and white toghether alone .Thanks in advance Steve
Hi, i found the diagrams really helpfull, the only
problem i have is that i'm installing some new Pick ups
on a 335 and i don't know where the earth (for the
strings) is wired too. Does it connect to the tail piece?
Thanks, Matt Rogers.
Hi,
Iv been looking at loads of sites for
a wiring diagram for a 62 squire strat.
At the moment has E.M.Gs which were put
in for me but now I would like to replace the originals.So Iv got a hole
bunch of different colour wires,pots,
pickups,and I really have not got a
clue where it all goes.And theirs no one here knows either,So I have to do it myself.Can you help out.
Thanks Steve
Hey, I am building a guitar and i can't find the set-up i'm looking for, you have the closest, i am looking for smoething for twin EMG Humbuckers, two concentric post (volume/tone in one) and a three way toggle. Do you have anything?
Ok, i have a Ibanez GRG170DX and i bought an EMG H4 passive pickup, my ibanez has a five way switch and i neeed a diagram for this. My problem is that the pickup Hums (makes a lot of noise) just like a single coil, do u have any advice on how to wire it?
Hello I'm going to change my 250k pots to 500k pots and at the same time on the tele NECK is a double stacked HUMBUCKER that i want to wire to the tone control for coil tapping/push pull? Could you show me the diagram, the bridge is a orginal single coil that i want left that way. SO to somerize a double stacked HUMBUKER to be coil tapped onthe tone control not the volume control. Thanks for your help "the rookie" David Anderson
have 3 diesel mini mack humbucker pickups i odered fro choppers music.com and are installing then in a strat. the strat has 2 wires. the pickups have 5 two of which are sauterd together how do i wire them to my guitar any input is greatly apprecaited thenks
Hey guys i just need a wiring diagram for an Epiphone SG Special. Its got twin humbuckers, one volume and one tone. I cant seem to find anything on the net apart from a normal Gibson setup with two volume and two tones.
i cant find a wireing diagrahm for a epiphone special model from the early 90's with a high output obl pickup which has 4 wires...anywhere if you can give a fella a hand then i will be forever in your det
Can anyone send me a wiring diagram for Yamaha APX6 electro acoustic please?
PS. I am getting 9 volts across the jack plug!
i am building an electric double neck 12/6 string and i'm not sure on the wiring for it all
Do u have any advice from the pickups thru the volume and tone top the jack plz. i am using single pickups for each set of strings
Looking for wiring daig. for vint.DC-59
Dano rescued from e-bay. for 2 lipstix.
A buddy of mine recently bought an Epiphone Les Paul Special II. Once into the little studio though, he found the OEM humbuckers a tad weak. We cannibalized a two tonne Charvell/Jackson for the pickups. They are either Charvell or Seymour Duncan four wire plus ground.
The guitar has a three position SPDT switch which we like but the replacement pickups as stated are four wire config.
I've tried a couple generic wiring options and I get the same result each time. With the bridge pickup selected, one of the coils is rather hot, while the other is rather low output. The same is true when the neck pick up is selected. In the middle position all four coils are rather flat. Both pickups are wired the same way.
Coil one's (+) to switch, with coil one's (-) to coil two's positive and coil two's negative to ground.
I've used the Duncan and the DiMarzio recommended wiring schematics as I can't find a Charvell schematic for a SPDT switch set up. Charvell uses a five position switch. Can anyone see where I've gone wrong?
Thanks
Greg.
A buddy of mine recently bought an Epiphone Les Paul Special II. Once into the little studio though, he found the OEM humbuckers a tad weak. We cannibalized a two tonne Charvell/Jackson for the pickups. They are either Charvell or Seymour Duncan four wire plus ground.
The guitar has a three position SPDT switch which we like but the replacement pickups as stated are four wire config.
I've tried a couple generic wiring options and I get the same result each time. With the bridge pickup selected, one of the coils is rather hot, while the other is rather low output. The same is true when the neck pick up is selected. In the middle position all four coils are rather flat. Both pickups are wired the same way.
Coil one's (+) to switch, with coil one's (-) to coil two's positive and coil two's negative to ground.
I've used the Duncan and the DiMarzio recommended wiring schematics as I can't find a Charvell schematic for a SPDT switch set up. Charvell uses a five position switch. Can anyone see where I've gone wrong?
Thanks
Greg.
Hello my name is corey lyons and i have an old bass guitar that was found in my attic
we took it apart today and almost all the of the wires were disconected
the top of the freat board were u would tune the guitar says victorian
and we looked fro anything else and thats the only thing it says
i need ur help to wire it back up if u could message me back it would be highly appreciated
Hi, I have just purchased an Epiphone SG custom 3 pick up guitar. I would like to change the control format currently 3 volume controls and 1 common tone. I have a Gibson SG custom 3 pick up and this has 2 volume and 2 tone and this format seems to give a better tonal control and more overall control of the guitar. The overall buid and playability of the Epiphone is quite good and I can tell the difference when playing the Gibson which I have had for 18 years but I have had the Epiphone so I can retire the Gibson as it is too valuable to take into pubs where anything can and usually does kick off.
Thanks in anticipation for your advice.
best regards
Dave Rowley
I am lookin for a wiring diagram for two humbuckers for one volume and one tone with a 3 way switch and or a 5 way switch, I recently purchased an schecter pt blackjack, it was butchered and does not work at all, different humbuckers, and 3way switch changed, I purchased two new lace alumitones as an experimental project, and need to get a good wiring diagram for the configuration mentioned above. Or if you good tell me where to look, the diagram I received was for les paul set up two vol and two tones, not what I was looking for, thanks for any help.
I have a Gould SG ,having problems with wiring to the output Jack.Have three wires a Grey a white and a Black all come loose.The Jack as you know has only 2 points for wires to solder to.
Which is the positive part on the jack?
I soldered the grey and the white wires onto the jack then found the black wire loose from where i don`t know.The sound is not as loud,could i have put the wires on the wrong terminals of the jack?
can you please help?
many thanks
Dave
I have soldered my jack socket with two wires that were loose when I took the back cover off.Now the output is not so good,any ideas as to what is wrong anyone?
Thanks
Dave
thank you!!!!!!!
I have a deluxe players strat with a pushbutton that allows 2 more pickup combinations than a standard five way switch - 7 combinations in total. I want to add a tbx pot as a master tone control for all pickups but I want to keep the five way + 2 swithching that is already working on my guitar. The only tbx wiring diagrams I've seen allow for tbx tone control for bridge and middle positions, but not the neck. Is there a way to have it work for all 3 pickups and still keep my 5 + 2 wiring? I'm inexperienced with electronics so a clear diagram would really help.
I have a set of adder plus corp Brad Paisley pickups and I need a wiring diagram for wiring them to the standard telecaster wiring scheme. They have a white and a red and green wiring on the neck pickup and a white with a white and black intwined wire with it and I need to know how to wire it up the right way since I'm used to the fender noiseless way of wiring a pickup.
Wiring diagram for a fender S-1 switching HSS configuration?
does anyone have a diagram for the vallet arts "Brent Mason" signature guitar?
Can you show a picture or describe in detail how to
disconnect the tone wire from a neck humbucker on a
Fender Squire Standard Fat telecaster.
thanks
Steve
i need help--have a tele with SD FS in neck and hot rails at bridge--both 4 wire HB's. Took guitar apart for refin and carefully documented wiring.
Since it's been 2 months, and with moving things about, some more wires have come loose and I don't know how to
reassemble. Use miniswitches--2 between vol and tone. They worked as follows or all 3 master switch settings
(F,B,R): both down, full HB (series) on both HBs. both middle pos--2 single coils; both pointing at player,
both PUs in parallel. It worked great on all these settings with no feedback.
I just cannot remember how all the wires go.
Many thanks,
Bill
can emg 81 combine with dimarzio pickus
emg on bridge and dim on neck
I need the wiring diagram for ibanez musician 1980 vintage, can you help me please?
sincerely
andrea
I need to get a diagram to change the tone nobe on my fender mustang to a volume nobe. I want to wire a volume for each pick up.
anyone have diagrams for three humbuckers of any type of switches
I want to wire 4 Pickups, in/out of phase and control all or 4 single switching.
Thanks
Just got an old RG570, with no pick up fitted, i've got a semour duncan screamin demon and would like a wiring diagram using only a single humbucker and volume control only.
cheers
Colin
diagram for a fenderstrat with non-RWRP midpup, midboost and RWRP dummycoil.
I need a wiring diagram for a Charvel S/S/H 5-way switch 1 vol/1 tone. Any help would be great.
Im trying to rewire a H-S-H Route 1 stratocaster.it has one volume,one tone.both pots are push/pull.it has a five way selector switch.I need a diagram to split each humbucker individually using both push/pull pots
I worl as a guitar tech for The Cribs and the
guitarist has just started using a Gibson 335 so I'm
looking for any handy repair tips for when the
inevitable happens.
I've got to grips with reparing whatever goes wrong
on a fender, but I am looking for advice on how to
replace the input soclet and tone/volume pots on
the 335 as there is no easy access to the wiring, or
to hold the parts in place when putting them back
in the guitar.
Are there any special tools available for fixing these
guitars, or any tricks I could use?
Cheers
Chris
I bought the Samarium Cobalt Noiseless Telecaster pickups and i am having difficulty wiring it up. I have sound but the volume know does not work now ! I was wondering if i emailed you a photo could you look to see what is wrong?
I am trying to install an Ibanez INF4 pickp in my RG220 The existing pickup has 4 wires (ground, red, white, black) and the INF4 has three (ground, white and red). Any sugestions?
s-1 tele assembley unwired to hook-up to a tele front p/u with a black ,yellow,white leads and a tele lead p/u with a black and white lead..i think the previous owner of the assembley has customized the assembley ,i just would like the standard s-1 capability.tks
Hello. I have a "86" Hohner B2A bass. I need to find a wiring diagram. It works fine until I flip on the preamp. It won't work and the battery started to heat up in the battery tray. I think it is in the preamp circit board. Looks like someone got solder happy! Some of the wires have been taken off and put back on. Possably a short? Thanks,,,,
I have just purchased an Epiphone Cas' and a pair of Gibson Dog ear P90's. I am just hoping that the pickups are compatible with the other electronic components in the guitar! I wondered if it is possible to obtain a wiring diagram for the Cas'?
Eddie
I just bought a newer squire strat the other day and i want to throw some better pick ups in but i want to look at the wireing diagram first so i dont screw up soldering the wrong wires... If anybody has a wireing diagram for a newer squire strat from 04-06 please send it to me!
I have a bc rich warlock that i want to rewire using just 1 humbucker and a 3 way toggle switch. the switch is there to interupt the signal and to give whatever in playing when i use it a bouncey feel. i need to know how to wire this
I need to know the scematics to the fire ax guitar made by mayhem bridge pickup-double coil middle pickup-single coil,bridge pickup-double coil,1volume,2 tone,5 way toggle switch,looks like 1 capicitar on the first tone switch.and 2 side wires coming from the sides of the 5 way toggle switch,also 1 input jack. Stanley
HELLO!
DOES SOMEONE KNOW ABOUT THE "FENDER TELE NOISLESS" WIRING? IT WOULD HELP ME VERY MUCH! THANKS!!
I need to put in a 3 way switch.. I have done many outlets and switches but not 3 way.. I even ran new lines from the box... I just need to know what the 3rd srew is .. do I run one wire form one 3 way to the other straight thew with no breaks.. Is there a diagram ??
HELP! CONNECTED FERNANDES SUSTAINER PICKUP TO IBANEZ RG270 WITH S/COIL MIDDLE AND DI MARZIO MO JO BRIDGE PICK UP.PROBLEM IS THERE IS NO SOUND AT ALL!YOU CAN VERY LIGHTLY HEAR THE SUSTAIN PICKUP. CAN YOU HELP AS IM GOING NUTS WITH WHAT IVE DONE WITH WIRING. THANK YOU
hi,
I have an Ibanez RG 550 LTD. I needed to replace all the stock pickups with the new ones. My luthier messed up the wiring i requested that i need to do it myself. I need your recomendation ( a diagram is better) on that.
My new pickups
Brigde - Di Marzio DP-100 Super Distortion
Middle - Seymour Duncan Hotrails HSR1-A
Neck - Di Marzio DP-193 Air Norton
I have Ibanez stock 5 way switch.
I have enough pull-up switch pots but my luthier only managed to fit 3 of them on the guitar.
My intention is 2 volumes (1 for bridge and middle and 1 for neck as neck has relatively lower output) and 1 master tone.
Pot pull-up switches will act like this:
1. Bridge and middle HB> single coil
2. Neck HB> single coil
3. Add bridge pickup when 5 way switch is in 4th or 5th position ( by adding the bridge hot to common output of the switch).
My problem is due to the mechanism of 5 way swith i can not make 2 volumes. If i could have 4 pots i would use 3 volumes and 1 tone that i could feed the 5-way switch from volume pots. But now as bridge and middle share pot 1, i can not do it. I can not figure out how to feed from switch to two different pots either.
Please reccomend me a solution for this. I have a gig tomorrow evening and there is 7 hours difference between my country and New York ( do not know santa Barbara). So i need your reply as soon as possible.
Please excuse my urge and thank you very much for your help in advance.
Best regards,
Dr. Taylan Benker
Turkey
Very intersesting for a novice like myself- and quite daunting. I have an epiphone open bobbin hb that I'd like to use in an es335 copy but don't know how to wire up. I just want a single hb in the neck position. Any advice is appreciatted.
I'd like to now if you have a wiring diagram for an Ibanez JEM 7 or another guitar that is HSH or HSS with the Humbucker split.
Do you have a wiring diagram for a Jackson strat style
guitar. I humbucker and 2 single coils?
Anything will help my project.
Thanks,
Lance
Hi,
Please help with schematics for HHH pickup combination in Start shaped guitar.
Ibanez RS-205 made in 1983. 5 position switch with 1 tone and 1 volume control.
Neck pickup is Dimarzio PAF Pro
Middle pickup is S.Duncan Stack
Bridge pickup is S.Duncan Fullshred
All 3 pickup are connected as humbucking serial configuration for hum-cancellation with maximum output(or so I thought according to schematics that came with the pickups).
The middle S.Duncan Stack sounds, very thin in tone and weak in volume.
Cheers Sam
hello! could you please send me an electrical diagram of a mexican built squier strat with the actual electrical symbols included? i'm rewiring a guitar as a school project and i need something clean and easy to read with the actual symbols, not just a picture. i've already got that. thanks a lot!
Anybody out there got a wiring diagram for an ARIA Pro2 SLB Series Bass.
TA.
a problem with my microphones twang king they larzen in its saturate I have do not find the assembly diagram on the Net it have 3 thank you driver
thank you
i'm trying to wire a single les paul pick up, direct to a 500k single pot,
no frills ,no tone , no switch, just pick up, pot, input....do you have a digram for this? Thanks Jimmy
do you have a wiring diagram for a fender jazz bass stack knob set-up? i am changing my stock 3 knob set up to a stack knob for a bit more control.
thx
m.t.
I have an 83 Strat and the pickup asm does not have any metal shielding under it like some other strats, just plastic - the question is, this has three pickups and the pickups N&B only have one insulated wire coming back from the pickup - not the usual black and white hot/gnd. The middle pickup is gray and black (two wires).
The question is what king of pickups are these? The Neck is RED insulation covering hot/gnd (one wire, hot/shld-gnd) and the Bridge PU is GREEN insulation covering two wires (hot and shield-gnd). The selector SW is a 5 WAY. I understand that it does not need the foil backing on the underside of the pickguard because the wires are the shielded type - but I cant find ANY fender strat PUs with shielded wire. This guitar was one of Kurt's crash Strats (in black) and may be composed of many parts, but the asm looks original with the jack in pickguard as it should for an 83 japanese.
Thanks!!!
I am trying to wire a guitar but i can't find the proper schematics. I want to wire a guitar with two humbuckers (bridge and neck), two volume nobs, one tone nob, the output jack and a three way switch. The problem is that for some reason my pickups only have two shielded wires and 1 bare wire. all the schematics i have seen have humbuckers with 4 wires. if anyone could send me a link that would help it would be greatly apreciated.
Hi any idea where I can get a wiring diag for a Yamaha SG2000 or 3000 with split coil tone pots?
does anyone have directions on making a lipstick cover pickup?
how do you rewire a guitar with one humbucker and two single coils with a 5 way switch
Hello, I having to redo this e mail because I used the word TX in it so here we go again. I have a Mexican made Strat that a friend is replacing the pickups for me they are the TX Special pickups and he said the wires on the TX pickups are a lot bigger than the wires in the guitar. He wired it up by the instructions that came with it and the neck pickup doesn't work. He changed the pickups in my Hwy 1 American made Strat with the Samarium Cobalt Noiseless and didn't have a problem and the wires were big just like the pickup wires. Will the TX Special Pickups work on a Mexican Strat or did he do something wrong? Or do you have any idea what went wrong. He said he went by the instructions on wiring it. This being a Custom Body work guitar I didn't do it myself because I didn't want mess it up. If you can help let me know. Thanks, Tommy PS Why can't I say TX in your e mail? Is this a dirty word?
I have a yamaha rgx 121 model
if possible i need a dimarzio pickup for the bridge.
any advices??
wiring harness diagram for a gibson double neck sg
I have a twin wilkinson humbucker guitar with single volume and tone knobs, and a 3-way switch. Could you advise on any coil tapping/phasing mods.
Thanks
Hi I am looking for a wireing diagram for an Ibanez JEM. It has two Dimarzio humbuckers, bridge and neck and a Dimarzio single coil in the middle and an in line 5 way switch. Thanks ,regards, Robbie
i own an ibanez axs 42 guitar. for the style i play it works well. all though when it comes to the low end it sound rather clustered and i get some evil noise . i was wondering if there was any wiring mods to maybe reduce these factors. i assume all i need is a better way to ground the wiring but im not sure were to start.
Do you help me about de diagram the pickups kent armstrong bass wire, with de active circuit BEQ-05? Thanks.
I would like to change ONE pickup from standard to an EMG 85. the guitar is a Squire. since the EMG has a battery while the original do not will it work?should I change also the volume and tone Pots?
any suggestionds are welcome. Thankyou
gostaria do diagrama(diabram) da gibson double neck
I need a wiring diagram for a fender TBX - I'm throwing it into a no-name guitar that has an H-S-H setup. Thanks.
I need a diagram of a basic washburn pickup
I'm having a problem with bad hum or ground noise coming from my les paul only when my toggle switch is positioned to neck or bridge pickup. The noise is gone when the toggle switch is set in the center position (both pickups). Could something be wrong with the toggle switch wiring?
Thanks!
Willie
have a squire 51 and need help hooking up a YJM DP217 and a EVO DP159 in it with a LP style 3 way. just wanna do it right. thanks
Hello, how is the 1995 Gibson Es335 dot wired, what size pots, and caps? thanks
I'm getting a loud hum from my amp when I plug-in would this have anything to do with the height of my pickups?
And if so can you tell me the height my pickups should be.
My e 1st string seems to loose volume after the 12th fret is this something that can be corrected?
Do you have a wiring diagram for a series 2 S1 by gibson? 4 position rotary switch and a toggle that activates just the bridge pickup or the rotary? I cant find one anywhere and Gibson can't or won't help me
Jeanie
Im building a guitar and cant get the wiring right, I have two humbuckers 1 vol (500k) and 2 tone (500k) one a 3 way tele switch (box style pins in straight row like 3210321) I want one position with one pup and a tone the middle position the other pup and tone and the final position the 2 pup & tones and everything controlled by the master volume, is this possible.
Hi,
I need the diagram of the yamaha rgx1212A.
Thanks.
Bought a loaded deluxe players strat pickguard and have the Fender wiring diagram, but it doesn't say why there are 3 ground wires. One to the bridge, one to the jack but can anyone tell me where the one that has a solder lug goes? Help! Thanks, Rick
I just bought an LR Baggs Ibeam Active acoustic guitar pick up. Can I wire it up to my existing Yamaha acoustic guitar circuity? (minus the Yamaha pick up of course)
Nobody (Yamaha/LR Baggs) wants to touch this, but surely it can be done. What do you think?
Jason In Vancouver
I need wiring diagram for a simple passive under saddle piezzo with tone and volume controls for accoustic guitar. Any help will be much appreciated.
Please help me!
I have a french brand - V-Line guitar(indeed very rare)
I wanted to wire the electronics properly. Also the tone control pot is spoilt and I cant get a replacement. If I can get a wiring diagram, even bypassing the tone control, I will be obliged. It has two pickups, a volume , a tone pot and an output jack. I dont even know if the pickups are single or double coil, coz they are embedded in the guitar!
Please help
Thanks and God bless
Rupert
Hi,Have you a wiring diagram for a HohnerJT60 please,Rob
Does anyone have a wiring diagram for two 4 conductor wire humbuckers with two volumes, two tones, and a 4 pole 6-way rotary switch?
hi.J have ibanez rg H/S/H with 5 way swich,j replace bridge pickup with emg 81,the rest are passive-so want to wire them like this(2 volumes-50K and 500K,no tone-emg on 50K volume independent,and passive on 500K volume)those conected with 5 way swich
Where is the number one sitch position on the five way switch? Is it up or down.
LOOKING FOR DIAGRAM FOR LP 2 VOL/2 TONE/ 3 WAY, WITH PUSH-PULLS FOR PARALLEL AND DUEL COIL TAP.CAN THIS BE DONE WITH ONLY 2 PUSH-PULLS? PLEASE HELP ME !
How do you wire a PAF humber to a 250K or 500k pot.
I am replacing the 3 single coil Strat pickups with 1
Dimarzio PAF pickup. The pickup has 1 black wire, 1
white wire and one bare wire which I am assuming is
the ground wire. Can anyone help me out here?
I have an Epiphone Les Paul Standard.
I need the diagram of the circuit to conect a Dimarzio Evolution in the bridge.
I have a dean ml and could you show me a wiring diagram for the EMG-H4 Passive Humbucker Pickups
thanks
dustin
i need ibanez rg series wiring diagram
how do you add a switch for a 4 string jazz style bass with vol vol tone for parallel and series switching???
In the twin humbucking circuit diagram, is the middle wire coming from the toggle switch soldered to a ground or is the wire soldered to somewhere else in the diagram? Thanks, the diagram is very helpful.
need diagram for jackson dk2 dinky 2 singles one double 1 vol 1 tone 5 way switch thanks
I have a Epiphone Les Paul, and am currently customising it.
Have you got anything schematics or instructions I can use so I can remove the bridge pickup?
I look forward to your reply
Best Regards
Dean
does anybody have a wireing diagram set up for Fender's scn pu's to a s1 switch on a tele. Thanks Ken
Hi,
i have bought a fernandes sustainer and a pair of the breed dimarzio pickups, is there anyway i can use both dimarzio pickups instead of the fernandes driver?
i just need a wiring diagram of how to wire the red green white black wires.
thanx.
spence
Hi there!
I am bulding a stratocaster copy. I am writing to ask if the capacitor's value has to choosen according to the pickups you are mounting or if a .02UF is going to work anyway. Is there a difference in tone if I choose a different-value capacitor? Would you suggest a 500K pot for the volume and 250K for the two tones?
Thank you very much for your help.
Regards
i have a les paul 100 and i have just installed an EMG 81 and an 85, but sound really bad. it gives off alot of noise and it they sound liek single coil pickups. if there is anyone that can help or shed some light on my situation please, PLEASE! send me an email.
death_to_the_mainstream@hotmail.com
I am trying to find schematics for japanese charvel/jackson. Please help cannot find any. I specifically need the two singles one humbucker with active pre amp. Has vol ton 50 k trim pot with three spdt's thanks michael
need to know how to install two double humbuckers wires in galveston les paul 777?
one white wire with ground in both neck and bridge insulation is red and blue
new humbuckers have 4 wires on them
black red white ground and blue
what wires from humbuckers do i attach to my two wires?
I need a wiring diagram/schematic drawing !!
I have,
2 humbucking pick ups,
1 volume,
1 tone,
and a 3 way selector switch NOT TOGGLE, it's a blade style like on a Jackson guitar. Can't seem to find it.
Can anyone please help ??
Thank you !
Mark
I have an 80's charvel randy rhodes flying V.
One single coil, (One white wire, one black wire)
One humbucker, (one white wire-one red wire-one black wire)
One volume,
3 way lever style selector switch (all terminals in a row)
Does anyone have a wiring diagram ??
Thanks ! Mark
I have A mid 80's Ibanez Destroyer. It was wired from the factory with 3 humbuckers a three way switch(toggle style) a volume and 2 tones. the problem is that the middle P/U seems constant I've rewired it only to end up where I started so I sinply dissconnected the middle P/U. It now switches N to N+B to B. Would I need a different switch to make the P/Us all independant? Any suggestions?
Thanks, Mike
How to wiring samarium cobalt noiseless pickups on a telecaster american deluxe with a 3 position s-1 switch ? In the fender site I've found only wiring diagrams with two cable pickups ( SNC had 3 cables ).
How do I wire a Seymour Duncan JB Jr. in the neck position of a Jaguar?
guitar wiring guide that will answer some of your questions.
I have an 80's 8 - lead (four coil) Bartolini
humbucker that I require a wiring diagram for. This
is a 4 coil version. One coil for three strings all in a
standard humbucking size.
Call anyone help with this?
Dan
I'm looking for wiring diagrams for a '75 Gibson S-1. (I'm also in need of the 4-way rotary switch(chickenhead, the 2-way bypass switch, the volume and tone pots, and the b/w/b/w/b S-1 pick-guard if anyone has any leads on those as well.
Someone butchered this old S-1 into a Les Paul config and I'm attemting to get her back to snuff. :)
Thanks,
Graham
I am trying to find the wiring colour code for a Yamaha humbucker pickup, as used on the ERG series guitars.
Thank you in advance,
Tony Thomson
I have a problem I have 2 jackson humbuckers and a 5 positions enclosed switch, I need the Schematic to make them sound in the 5 positions of the switch like hum and pickup right and i want to add another vol knob and tone knob as well, the thing is that i cant find the schematics with the kind of switch that i have, im sure its possible i just don't know how to pull it of any help would be appreciated.
tnx
manuel
I have an American telecaster deluxe with the three pick up configuration and an extra toggle for parallel and series switching. I replaced the neck and bridge Fender Noiseless pups with samarium cobalt noiseless pups and left the middle fender noiseless pup in place. I soldered the white leads from teh SCNs to the appropriate ear on the switch and soldered the black and green wires to the volume pot (ground). All three pickups work properly when the switch pup is selected individually. However, when I select once of the combinations, i.e., middle/neck or bridge/middle, I get a thin sound with 1/2 the volume. Can someone help me figure out what I need to do to get the full volume and tone back in the combination positions??
Thanks.
Do you have a wiring diagram for a active, passive switch in a Fender Jazz Bass with Noiseless pickups?
Please can you show me the wiring diagram for my Fender Strat (Squier)having removed the original pickups and wanting to fit 2 humbuckers straight from an Epiphone Les Paul. It will still have the 5 way switch. Many thanks.
I am wanting to replace the single coil neck pickup on my MIM fat strat with a Hot Rails. I am noticing that the recommended wiring for the Hot Rails is much different from that of the stock Strat humbucker that is already in the bridge position. Should I emulate the wiring of the current humbucker or go with Seymour Duncans suggested? Help!!
Tengo una Fender Strat. y tengo problemas de ruido en mi singer coil
i have a question about the diagram from the top the fender style single wiring how many ohms the potntiometer?
can you please send me the
diagram and measures of the
gibson sg standard bcuz i need it for
my class to do a project please reply
soon...i need the plans so i can build
one in drafting class and i play guitar
and need to know all of the
dimensions if at all possible so if you
could ddo that for me i would
REALLY appreciate it thanx
signed wesson
powers
i was also wondering how long it
would take you to get the prints to me
bcuz i really need a copy please
Do you know the wiring with s1 5 positions swich for
telecaster?
Thank you from paris.
Olivier
does any one know the correct wiring for a Gibson 335 S Pro that has a coil tap switch in the curcuit?
How do I wire up 2 really old single coil pickups so I can chose either pickup but also both - in-series and in-parallel.
Would slider switches be useful to "switch" on/off either pickup ?
How do I go about a switch to reverse the polarity of one of the pickups ?
Each pickup has 2 wires to go to the wiring set-up I ask about, then will poutput this to a vol+tone set-up I have already.
Your help is much appreciated.
i have a tele style guitar,how would i need to wire the volume and tone for a push pull set up(where the volume is reduced 25% or so of the pickup signal) thanks
Hi, need help, maybe ya'll can help I have and older godin tc, not your typical one, it is set up like a nashville tele, I want to install 3 seymour duncan hot rails in it, why, just because, I have a neck,mid, and bridge hot rails, and this tc has one volume and one tone, with a 5 way switch, can you send me a wiring diagram, or tell where to look for this configuration, right now it is set up rio grande's their okay, but I want to try this, thanks ahead for any help.
Hi, I was just wondering how to change a pickguard, (just on any type of guitar on electric), because i'm buying another electric guitar, and i don't want to stuff any thing up.
Hey,
I have an early '70s 3-humbucker SG Custom. I'm trying to find a wiring diagram for it, and maybe some circuit mods to change the p/u combination selections. Also, any suggestions on replacement pickups would be helpful (my stock pickups seem really weak.)
Thanks,
Patrick
I have a '83 (i think) made in japan fender telecaster with 1 volume, 1 tone, and 2 toggle switches. 1 for pick up select and 1 for phase (i think). Do you have a wiring diagram for this. One pickup is bad and one toggle switch is broken and I would like to fix them.
THanks
Bubba
looking for a wiring schematic for a peavey fury 6 string bass.
5 knobs
1humbucker2singlecoil jackson pickups
can someone please tell if they know where to buy a loaded hss pickguard with s1 switching for my american strat. and also possibly point me to a wiring diagram for one. thanks,
ben
hey i am building a jackson dinky dk2m guitar. it has two regular volume knobs and a five way toggle switch. how do i wire the pickups?
I am rewiring an SG. It is down to raw wood. I bought 2 P90's from Hamer. I just want Tone and volume from the 2 pickups and I have bought a 2 way switch. I am trying to keep it simple. Neck pick up and rythem. I work @ Ovation as a neck carver.
hi
is there any chance of a hohner b2a wiring diagram.i bought one in bits
& as i am a retiered musician with a very bad memory i am strugling with this one even though i have rebuilt many guitars.(silly me)
hope you can help
thanks jez.
Hi I have a BC Rich bronze series The jack from the amp to the guiter came off. their is a gray wire it has a white insulated wire with copper wire wrapped around with the gray coating around it. I have a soldering gun. PLEASE HELP A poor Guitarist
Hey can you help me fix a 3 volume & 1 tone humbucker diagram?
Thanks,
Dave
can you use alluminum foil for conductive tape?
please help, i desperately need a wiring diagram for 1 humbucker, 2 single coils, 1 volume, 1 tone, 1 on/off switch for each individual pickup (total 3 switches)
pls email me wiring diagram of fender daijin bass guitar pick up and maintenance..tnx in advance
I own a B.c Rich bronze series warlock and i was told that bronze series only have 2 conductors but i cant find any place that says it so do you kno because i want to switch the BDSM pickups to either emg or seymour duncun
hey does anyone have any diagrams or suggestions about how to wire a jackson dinky with a 5 way switch and a humbucker-single-humbucker pickup combination? cheers!
could you please go one step futher, three humbuckers, a five way switch, coil spliter set up. is it possible to use the pul-push pot to act as the coil spliter switch?
Any diagrams for the Pete Townshend Les Paul Deluxe that has three pickups with the Dimarzio Dual Sound (phase in\phase out)?
Thanks.
Coke
I'm looking for a wiring diagram for the following Strat
pick-up configuration:
Neck & bridge = Humbuckers
centre position = single coil
Thanks
do you have a wire diagrab SSH with 1 volume & tone with a 3 way switch
hi i am rewiring my jackson and it has a HB/S/HB configuration, a 3 way switch and 1 tone and 1 volume knob. but i am putting in a mini humbucker in the middle space and two normal humbuckers in the others can u send me a wiring diagram? thanks
i made this guitar for my GCSE res mat.
i have a bridge postion seymour duncan humbuker and a copy p90 at the neck. im having what i think is a earth hum wheneva the control knobs arnt on maxium. there is also a 3 way switch which works! im confused by the p 90's wiring as i only seem to have, a bare,red and a white. not any others. this doesnt corrispond with any of the wiring diagrams i can find. i dont know the make, and it didnt come with a wiring diagram, as it was cheap..... unlike the seymour duncan lol. cheers barney
Hi there im based in north manchester milnrow. any problems with your guitar setups, refrets, headbreaks, electrics/wiring,
give me a call for friendly advise and price. we can collect/deliver if needed
would like to know if covers on humbuckers just slip off or what cosmedic issue. thank you
how do i wire a teisco single pick up 1969 with a humbucker double to one volume one tone with no switch or should i use a switch?
Please. how to wire 2 hambuckers with 2 independent volumes?
Thank you
I have a 72 fender p and did stupid things when I was young, anyway I could really use wiring for one volume two pickups, one 72 p and one Diesel vintage fat jazz {double passive jazz}. Any help is greatly appreciatted!! Thanx Barry
if i wire 3 humbuckers (strat size)2 seym. 1 dimarz.in neck , all to a TBX for tone, what effect willthere be ,if any, other than decent tone variations, ihope? or should i use twotone pots? and will the p/u"s wire color respective, or should i wire the dimarz. green hot? i would appreciate any input, thankyou.
Hi,
I am niterested in some special wiring. I would like to have telecaster with two single coils (p90 neca and overwound GFS tele bridgepickup, but to avoid this very irritating hum. So, my idea is to witre those pickups serial (I play industrial metal)and make both pots as volume pots. Is there some diagram to wire it that way? And is it a good idea? Thank you in advance. Vanja
I need the wiring diagram for the Hi-A guitar pickups
I need a wiring diagram for EMG pickups "ACTIVE" 81
/60. How many batteries? 1 or 2?
Thaks!
well ive got a guitar i bought for a 150 brand new lol (how good it is i dunno :) ...but anyway i also have a fernandes the function sittin here with switch problems volume an pickup select switch. now i wanna fix it or get it fixed cause its just sittin here id like to paint it quick kinda fix it a lil cause it might be better than my $150 jerzey, is it worth an have u got a wiring diagram its got a bigger wider pickup at the bottom an 2 narrow ones, one in the mid, an one at top.
I need a diagram to wire 2 humbucker to 1 volume split coil pot (no tone pot) three way switch
thanks
AAAAAAAAaa I have a B.C. Rich Beast that I am slapping an EMG 81 on and I have already un installed the bridge pickup. I see all the standard wiring the neck pickup the new pickup but there is this wierd skinny black wire that doesnt seem to go anywhere what is it? please help!!!!! I need a wiring diagram of a beast guitar!!!
i am repairing a yamaha gbs 2000. it has two tone pots that are push/push phase switch controls. the neck tone pot got damaged and i am trying to use a standard tone pot without a split feature, and cannot get it right. it is acting like a volume pot. what am i doing wrong.
I'm building my first guitar, I am installing 2 humbuckers but want to install a 5 way switch instead of a 3 way. I am thinking of 1) neck humbucker 2) neck/bridge humbucker 3) bridge humbucker 4) neck single coil 5) bridge single coil. Are there any schematics like this that I can follow or any other suggestions/ideas of what else to do with this setup?
Thanks,
David
I have a Gibson double neck. There is a loud hum, could it be a ground problem?
Do you have a wiring diagram of the pickups.If so it would be very helpful. Thank you.
Can any one help me? I bought a set of Seymor Duncan Black out Active pick-ups.
My soldering skills aren't all that amazing. So... any one know where I could find a good wiring schematic for these?
I couldn't even find anything on the SD website, let alone, get a response from there CS...
Anyhow, any help will be greatly appreciated.
Please, help!!!
Are you the wire schematic of the PRS H/S/H, 5 way rotary switch?????
thanks.
HELLO.BROTHER CAN YOU HELP ME TO SEND ME THE SCHEMATIC WIRING DIAGRAM OF THE HOHNER BASS GUITAR MODEL (B2A).THE WIRING IS SCUMMBLED AND THE ACTIVE SOUND DOES'NT WORK AT ALL .IF I'M NOT DISTURBING YOU .THANKS .SORRY FOR MY POOR ENGLISH WRITING .I LIVE IN EGYPT AND I'M HALF ITALIAN AND A JAZZ GUITAR PLAYER.SEE YOU
FMIC replaced a defective bridge pu(didn't work intermitently, then completely)in my 52 reissue tele. At that time the warrenty person modernized the selector config. but didn't use the .022mylar capacitor given to me with the guitar(mod done at my request)
The guitar now besides being way more microphonic than it ever was, makes static and popping noises, (when everything is not grounded by me touching some metal on the guitar) as I simply slide my left hand from one position to the next on the neck without even fretting any strings.
I'm thinking of reversing the selector and capacitor mod to orig....then I could tell if it is the new pickup???
I hear about pickup polarity issues?..
Any thoughts on this.......
I imagine we should have used the included .022mylar cap specifically included for this mod?........jeff
OK, I have an old guitar that I inherited from my wife's grandfather, and it has four single coil pickups. Is there any other way I could wire them besides putting them in series and doing it like humbuckers? I have no idea, and I can not find any schematics for 4 pickups. Please help!
Im trying to replace the bridge s/c on my strat with an EMG bucker. Any chance anybody could help me figure out the wiring scheme?
I want to put early 80s pickups on my new bass, but my new bass has one orange wire out of the pickups and the 80s has one white, 2 black wires out of each pickup. This is a fender jazz bass. Is there a wiring diagram for 80s pickups available?
I need Help!!! Please!!! lol. i try to find any diagram to connect at full power 2 Hums and 1 single coils:
PAF Joe DP213BK NECK
FRED DP153FBK BRIDGE
ISCV2 EVO Middle
i Already have the multiswitch
I Want this:
position 1: BRIDGE
2: BRIDGE AND MIDDLE
3: MIDDLE
4: NECK
5: BRIDGE AND NECK
If this can be possible i need to know where can i find the diagram.
Thank you a lot
I have just finished building a les paul style guitarand have got to the wiring stage.the only problem i have is that most wiring diagrams show 2 leads to the jack socket, one of which is ground. I have a barrel type socket which has 3 terminals one of which is ground. Can I use either of the other 2terminals for +.
Regards
Ken
I was wandering if anybody could get the complete diagram for the electronics for an Ibanez rg550?
Does any body have a diagram to wire a yamaha 4 pole 5 way switch with 3 bill lawrence humbuckers, I would appreciatedvery much
I need a diagram for the b.c rich bdsm if possible.
do you guys have a diagram for :two humbuckers with
a two way center coil-split switch?
im wiring just a humbucker on a strat into a 500k pot and not using a tone or selector switch and cant get any noise outta it
I wanted to know the schematics and or see a diagram of the gibson s-1 it's an early 70's model. I've been having some problems with it and was going to put new pickups in it to fix the situation.
If anyone knows what pickups would sound great please let me know. I've put in some Seymour Duncans in my tele and I liked it. I put in a stacked humbucker in the bridge with a coil tap and man it sounds awesome and gave me a ton of versatility. I thanks you in advance.
I have a Korean 3 way switch that has the connections on one side of the switch instead of the bottom like most switches. There is 3 connections down,with one connection in the middle, and the three more down. can anyone please help me with the connection of this switch.
looking to install alnico v pickups in my telecast, will these wire up to the control assembly thats there or do i have to change this? can anyone help me with this thanks.
i am looking for a diagram that shows me how to wire the humbuckers in my flying V without using the tone pots.
I have an old bass and I am trying to fix the pickup wiring properly. It has one single humbucker bass pickup. It looks like a p90. It has 2 black wires and one red. I don't understand the 3rd wire and I need a schematic to understand how to wire it properly. Thanks.
I bought an M.S.A universal pedal steel guitat some years ago and someone badly fitted a George L pickup.
The pickup has a white wire, a black wire, a red wire and an earth wire ie a screen he has wired the red and the black together to the red and the white wires to the slieve of the jack and black to the tip.
The screen wire has not been used at all, without actually seeing the setup yourself does this wiring seem to be ok or can you tell me where I could find out the wiring of this pickup.
Your advises would be much appreciated.
Kind Regards
Tom McGrath
Hello:
I am looking for the schematics for a double neck ( 6on top and 12 at the bottom) Fender Strat.
Would you be able to help?
Thanks for your response.
Fernando.
hello, I am looking for a wiring diagram for strat style guitar with two(2) single coil pickups, with 2 tone controls and one volume control. A 3 way switch will be used, where the middle position has both SC Pups connected. Can you help me ?
thanks
David
Hello i would like to get the wiring diagram of the Gibson Ace Frehley les paul (three humbuckers dimarzio super distortion dp100) please can anyone out there hear me --help me sos sos Thanxx a lot Bernie K.
can you do a diagram for a guitar with h-s-h configuration with 2 tones and 1 volume please.
thanks
Hello
I need a wire diagram for Charvel Model 3 with SSH, 5 way switch, 1 volume and 1 ton.The switc is the same like your upet sheme(5 way with 4+4 contact).
Please help.
Have you a wiring diagram for a Yamaha 302s electric guitar? Have been searching everywhere for one.
i was wunderin if you could send me the wiring diagram for an encore guitar with single tone and single volume control!!
how do I wire 2 humbuckers onto just one volume and one tone pot with a 3 way toggle switch,instead of the usual 2 vol.2 tone set up, with switch in the first position for bridge pup.middle position for both pups and third position for neck pup please,
i got from a friend an ibanez pf 230. it's a three humbucker les paul-type one. the middle pickup is off and i don't know where to reconnect it. should it go directly to the 3-way switch or to one of the volume knobs? i'd appreciate some help on this
Can you help me I need wiring diagram and help in how to wire vintage noiseless strat pickups, the diagram given by Fender is pants. Any help will be of great benefit to me.
Regards
Marc
i wonder if you can help. i have a build your own guitar kit but no instructions and the supplier didn't send me a diagram when asked. it is a prs copy with 2 humbucker pick-ups with 1 tone and 1 volume knobs for both pick-ups and a toggle switch how are they wired?
Can somebody help me out? I'm not really familiar with wiring, but I'm wanting to take the neck pickup out of my Jackson Dinky and just leave in the bridge (EVH style). But I want to turn the P-up selector into a kill switch. Any help?
Does anyone have wiring diagram for a Les Paul in
which both the neck and bridge pickups are set up
for coil taps?
Hello I have a problem with an installation of a circuit in my guitar...
I have a fender stratocaster deluxe 50 aniversary... and I want to put the genuine eric clapton booster and tbx circuit in my guitar... but my coils are smc noisless and them have three coils.... and I dont know if I can install this circuit on my guitar...
can you help me please?
thank you very much.
Hi i have a fender strat type guitar with ssh configuration, it has dimarzio virtual blues singles, and a dimarzio dist humbucker, somebody recomended me gettin a .001 resistor and i did but i want to know how to install them i havent found anythin on the net. can u help me. thanks
d
Help: Upgrading Affinity Butterscotch Teli with Samarium Cobalt Noiseless pickups.
1. My affinity Neckpickup only has two wires. The Samarium has an additional green wire. It looks like I solder the black and green wire on the outside case of the volume knob together. Is this correct? Cant understand the purpose if it is going to the same darn place!
2. The Bridge pickup has black wires connected a gound "thing" that you must screw it somewhere. Where?
Please HELP.
how to wire up a sg with one neck p90 and bridge p90 stack with two volume two tone one being a pushpull pot and a 3 way .thanks for your time
does anybody know were i can get a wiring daigram for a hohner research revelation rst guitar thank you for your time james
Hi,all
Have you, by any chance, got a copy of a schematic or artistic impression of wiring for a Hohner active B2A bass guitar?
Many thanks, in anticipation.
Kind regards,
Peter
hi im trying to rewire my tokai love rock to get that peter green out of phase sound on middle toggle can you please help
I'm putting back together a Strat...everything seems OK except there's too small springs - one conical in shape - for each pickup (all single coil, can anyonr tell me where they go please?
i have an aria pro 2 bass guitar and iwant to update all the pots wat would you recomend as all the homs rating stamps have worn away .it is the active pick up and around 12 years old i would realy appreciate you input yours faithfully paul
I have an American ash tele and want to add a ST-MD samarium pickup in the soon to be middle position. Do you have a wiring diagram for this configuration? The pickup I have is a center position strat marked ST-MD.
Is it possible to wire all three pickups to one volume and tone knob
i have recently built a vintage metal axxe flying V... i have converted from 2 pickups to only one.. the wiring is proving a problem.. do you have any diagrams for 1 pickup,,1 tone,, 1 volume...please help lol..thanks.
I want to wire my 1956 reissue gold top les paul with a push pull pot but I want to make the bridge pick up out of faze I need wireing diagram please thanks Ken
I need wiring diagram for a Dean guitar with 1 humbucker 2 single coil pickups and 5 way selector switch 1 volumn and 2 tone pots thanks Fred
I need wiring diagram for a Dean guitar with 1 humbucker 2 single coil pickups and 5 way selector switch 1 volumn and 2 tone pots thanks Fred
Hi, i have a Jackson flying V, 2 humbuckers, 1 volume control, and one tone control. I bought it in a sorry state and have been repairing it. My only problem is the pickups only work when the volume is turned up and held at 10. Does this need replaced? or is it a simple solder job, thanks for your time, Matt
i have a squire showmaster with 3 pickups n i need the circuit diagram for it
pickup wiring for an Ibanez RX Series!!
-please
Does anyone have the wiring diagram for the pickups/electrics on a Hamer Steve Stevens 1990 model? This is hunbucker and 2 singles.
do you have diagrams to turn a passive pick up to an active pick up?much help will be appreciated...
I have a double necked guitar that I am making. How do I wire the neck selector? For that matter how do I wire the whole thing.
Circuit drawing for the invader pickup please
I need a wiring diagram for a Hohner B2A bass guitar with active/passive toggle and dedicated XLR line out direct. Can anyone out there help me?
H All,
I want to wire a 4 way switch to my Telecaster- it has a standard H/B in the neck and a mini H/B in the bridge- both work perfectly as per makers specs.
I have wired both pickups as per various diagrams for typical 4 way switch setups but I'm not getting the results I want- 4th position- both P/ups in series.
Any input/suggestions/correct wiring diagrams welcome!!
Thanks,
BAD$
How do you wire a single humbucking pickup with 2 pots?? I cant find it anywhere and u have good 3 pickup diagrams. plz help!!
are there any diagrams for a flying v? two humbuckers, 2 volume, one tone, 3 way switch?
Hello.....
I want to know infinity pickups diagram,could you help me to show the diagram? Please send me to my e mail.
Thank you....
hi folks..anyone out there have a wiring diagram for a bartolini hi-a humbucker?
thanks,bob
Need wiring diagram for Fender "Tele"(Squier "Bronco")style bass...1 single coil(not "J")w/ volume &tone pots,PLZ&THX...alx
i have a telecaster that the volume and tone knobs work in reverse. when you turn the volume up, it goes down and when turn the tone knob for more treble, you get more bass. How can I fix this?
hello
my name is tobias and i`m from germany.
I`trying to rebuild my guitar (pickups).
I had a "seymour duncan sh8" and I only have to add it on the volume-adjuster. now I don`t know how to do the wiring diagram. after all it should look like the squier of Tom Delong (only one pickup and one volume-adjuster).
please can you help me
Sincerely,
Tobias
Is it possible to wire a strat with one mastervolume for all 3 pickups and NO tone control at all?
hi, i need a wiring diagram for my brent mason telecaster guitar. great guitar but i cannot play it.
Hi can anyone help me with wiring a teisco pickup to a volume control and a output jack. The pickup has a red wire, a white wire and a thicker bare wire. Not sure what to solder to where....Thanks, Stu
I need a diagram to install an EMG-60 into an ESP EC-50 guitar. It has 2 vol., and 1 tone. The plans that came in the box don't have a match for this set up.
Hi, I am interested in wiring a Seymour duncan
little 59 hum-bucker in the bridge position of my
start with two fender lace sensor pickups in the
neck and middle positions along with a five way
switch. Can you help?
Thanks,
Philip
I just bought a new wiring kit for gibson 335 from mojo's website and I can't understand his gibson 2 Humbucker Wiring Diagram. When I look to other wiring schematic on web, they are all different ! Wich one should I use ? Thank you
do you have the guitar pickup wiring diagrams for the yamaha bb404 (bass guitar)?
i need a schematic diagram of fernando bass guitar single pickup..its hard for me to find it in net.thanks in advance..
im searching for a wiring diagram for a Ibanez rg140 hss with togle tone switch,,cant find it anywhere heeeeeelp
Hi. Im looking for wiring diagrams for fast track 2 to be fitted into a strat with 3pots. Can you please help me? Thank you very much. Pol...
I am building a bc rich warlock.I have to paf humbuckers to install on a three pole,1 volume and 1 tone. I need simple schematics( i am new at this) to wire them in, and is there allternate wiring for different sounds?
I need a wiring diagram for Ibanez mc500 1978 no EQ. Thanks! Dan Gates
bass collection by NANYO model sb 460 wos, bass aria pro II SLB- 2
please can you advise the wiring diagram for the epiphone special 11 as it has two humbuckers but only 1 volume and 1 tone pot and 3 way switch can you help yours hopefully palewie
I want to hook up a kill(on/off)switch for the middle pick up on my custom strat (has the Yngwie pups in it)
I want to be able to turn the mid pu on while in the neck or bridge position. It has a main 3 way selector and I have a mini toggle installed. Could you give me a diagram of the best wiring for this?
thanks........
Rob
do you have a picture from a Kent Smith soapbare pickup 4 conductors
I really need one or more.
blessings
Mauro
Costa Rica
hi i have a fender (mexican) 5 string bass which i have just fitted a emg active pick up in. i thaught it was a bit weird that i only got one set as the set but i fitted it where it was discribed but it sounds horrible, is there any way i can also wire in mu old passive pickups with the emg? or do i need to fit a switch etc?
thanks Rupert
I have a esp viper with a single tone knob and a single volume knob. i have every thing but the tone knob right i believe. plase help me! i need a diagram or something.
hi i have a jackson JS30 that i need to wire up.but the rest of the internet is no help or i just looked in the wrong places.this guitar has two humbuckers,a volume,a tone,and a three way switch.i have no clue how to do get this done. please help
I have a epiphone les paul custom. I,m installing EMG 81 85 pups , But the wiring diagram on the 3 way selector switch has two grey wires, one with red and white wires and a braided wire... and the other grey wire has one white wire and a braided wire ....Where do I solder these wires ?
Perhaps you have a schematic wiring diagram .
I,m completly stummped...
Thanx,
Dave
Do you have a wiring diagram for 2 Humbuckers/1 volume/1 Tone knob with a 3-way gibson style toggle switch?
Installing 2 Seymour Duncan Distortion Mayhems PUs
Installing 2 Clarostat Carbon Comp (Mil Spec) 500k Pots
Include changes for:
Installation of 1 mini toggle SW and preamp in the future
Am putting together a Telecaster Nashville style with a Kent Armstrong mini Hum in the bridge position ans single fender p/ups in middle and neck. Having trouble finding a wiring diagram. I want to coil split the Hum and also use out of phase. Any ideas.
Cheers
Tommy
HI, I too am after a wiring diagram for an Aria Pro SLB-2. Bought one second hand and the active circuit is disconnected (a battery was still sitting in the battery compartment with no snap to connect to!). Looks like they attempted to bypass it but the active pickup is not responding so I think I may as well get it back to how it should be if I'm going to have to re-wire!
Cheers
I am looking for a wiring diagram to wire EMG HZ pickups into an Ibanez RG350 with HSH pickup configuration with a 5-way switch.
Thank you,
Steve
I am building an SG double neck. I am looking for a wiring diagram for 2 humbuckers in each neck position with 3 selector switches.
Im rebulding an old Ibanez exSeries. I need a diagram of it that has 2 humbuckers and a single pickup. It has a 3 way swith and 1 volume nob, and 1 tone nob.
If any1 could help it sure would be nice
go to seymour duncan website and go to the support/ wiring diagrams.
i was just want to know where does the red wire go from the pickup
I'm wanting to wire 3 humbuckers; each having their on volume pot.
No switch and no tone pots....volumes only. I'm using 4 wire GFS pups with bare ground........Any diagram help will be appreciated.
I have a question and no one has been able to help me. I bought a Seymour-Duncan STK-1BS bridge pickup for my Stratocaster and they didn't put instructions in the box. It has a red, green, black, white and bare wire and I haven't a clue which way to solder them in. I've be all over the web with no luck. I don't know it you'll get this or not but if you do I'd be grateful for any help you could give me. Thanks.
Delbert Ralston
Hi just wondering if anyone had the circuit diagrams for a Hohner B2A bass. Thanks much
Position 1 switch towards the neck is the neck pup, two is the neck and center, three the center pup, four is the center and bridge, and five(all the way towards the 1/4 ) is bridge pup.
Hey Delbert I emailed you but in case you were wondering what yank snatched your email address, I will post it here. Seymour Duncan wiring codes are as follows: black is hot, green is ground, red and white solder together and tape. There is also a bare wire that must be run to ground. If this is still unclear Google seymour duncan and under the first link there will be smaller links, click the wiring diagrams and it will take you to his website. There you can choose what guitar you have and it will tell you how to wire it up. It also has coils splitting diagrams if your in to it.
i have a very old stafford guitar with one pickup, 1 tone pot, and 1 volume pot with the cord input jack. i cant find anything on the basic diagrams to fix it. its an off shoot of the kayway or sumthing like that from japan if that helps
why arent the diags in colour ?
The reason the diagrams are not in color is because different pickups have different colored wiring. It would be very difficult to list them all here. Check with your pickup manufacturer.
Hi I bought a prs pickup 57/08 neck position, it has one black cloth braided cable and a white one
Can you help me connect this to my telecaster. It has a 5 way-switch and 3 pickups. thanks
have a nice day
Hi I need the wiring diagram to connect a gibson burstbucker pickup into a tele on the neck! thanks!!!
Anyone, please help!
Does anyone know where I can find a wiring diagram for a SINGLE p-90 pick up that I want to put on an old archtop acoutic that has a wooden bridge. (how to ground, etc???)
I want one volume and one tone control. Anyone who knows where I can find a diagram for this, let me know and I'll send you some free tunes!!! (Yes, I know that may not be a big deal these days, but it's all I have to offer, and they are great tunes! Check out my web site and see. You can listen to any of the tunes there full length on the CD sales page.) THANKS!!!
E-mail me with a link to such a diagram if you know one at:
kelly@kellysrockandroll.com
hej people!
I own a HOHNER REVELATION ATX with 27 frets.
some time ago I removed one of the singlecoils to use it with my strat.
now I want to reinstall it in my hohner, but whatever I do, I cant find any wiring-diagrams ... even the hohner company does not reply to my requests.
so heres my question:
does anyone own a wiring diagram for a HOHNER REVELATION ATX (very rare) ?
Please help if you can !
Thx a lot,
Amandas
Can you add Hot noiseless FENDER pickups on my SQUIER guitar? If so, will i need anything else to make it work?....
i am looking for a wiring diagram for a 1961 burns sonic guitar it has two pickups, one volume control, two tone controls, one three way
switch, and one two way switch. would be very thankful
dave c
Hi,
I have a Washburn Mercury MG 340. I put it through some body work and so I had to remove all the electronics. I drew a diagram of everything but I lost it.
Can anyone help me with this?
tnx
I need a diagram for 2 single coil pickups,1humbucker,1volume,1 tone, and 3-way switch.thanks
I have an epiphone les paul special 2 that i took apart and painted red. i now need to put it back together and dont know how to wire it, and i cant seem to find anything about it. I has two humbuckers, 1 volume knob, 1 tone knob, and a three way switch. can u help?
I have an epiphone les paul special 2 that i took apart and painted red. i now need to put it back together and dont know how to wire it, and i cant seem to find anything about it. I has two humbuckers, 1 volume knob, 1 tone knob, and a three way switch. can u help?
i need to know how to complete a wiring for three pickups gibson
I am working on a buddy's axe. He wants two humbuckers (neck/bridge) with a single in between wired to a single volume and and single tone push/pull with a five-way way switch. Do you have anything like that? Have you heard of anything like that?
does any1 have a diagram 4 a fender squire strat? please?
I would like to rewire my strat: with 2 volume controls 1. for neck & middle 2. bridge and 1 tone control for all 3. with the mid pickup out of phase.
Can you tell or show me how to do this?????
Thanks for your time: RLS529
Hi,could u give me a diagram for one gibson open hb,1 vol & 1 tone
i have a yamaha rgx 612s electric guitar. rewired it for a freind. everything works fine.. except the middle pick up. awesome guitar. sounds great for heavey metal and even blues in the neck pos. has a push pull tone knob, for spliting the humbucker i can only assume, but that does nothing as well. cant figure out what im over looking, .. driving me nuts. im usually pretty good with mods and re-wires. looking for a schematic of some sort to get it going. like i said the middle pick up and the push pull doesnt work, along with the 2,3 and 4 pos on the pick up selector. just the humbucker and the neck.once its back to all sys go its an awesome guitar. powerhouse. right up there with the ibanez and the dean, the charvelle. whatever. and ive realized something, floyd rose style bridges dont actually make a guitar sound any better, in fact there prob not worth the trouble. if any one can help then you would be what they call "the man" ... or "the girl" if theres any girls out there soldering away on their daisy rocks. and if theres anything i can help someone with as far as their guitar goes, lay it on me. i shall do my best. wich is uaually pretty good. thanks!
I would suggest the easiest way would be to phone John Wesley and ask him.
Phone number 01833 638 559
need wiring for p-bass,,plus jazz pickup too,,like the deluxe bass,,
the split pickup and the jazz pickup okay,,thanks
ok nice lupet nmn ganda im proud of all of you
HELLO.
I HAVE A YAHAMA GUITAR RGX 121 Z AND I NEED A WIRINGS SCHEMATIC. ANYONE CAN HELP ME?
THANXS FROM BRAZIL!!
is there a way you can wire a twin humbucker system and have one volume
knob
Im looking for a wiring diagram to "Shadow SH EQ5 Active Humbucker with Built In 5-Band Graphic Equalizer"
On of the cable from the battery is lose and I dont know where to put it.
After my guitar lesson in Edinburgh, I took my guitar apart and slowly put it all back together to find out what
happens when I change the caps, not much...
Can you help me on Pic on how to connect two single coil and one humbucker in a 3 way pic up switch and one volume and one tone
ing saved my life. well, maybe less dramatic than that. thanks for posting. word.
someone I could spend the diagram of a guitar Yamaha RGX 312
Simple way to find out... get something metal like a small alan key or screwdriver and gently touch your pickups with it, one at a time (while it is plugged into something of course). you will hear which pickups are active. Simply repeat the process with your switch in different positions to discover which pickups are active and which are not
hello i use tom anderson pickup. my setup HSS. now i use normak 5 way switch. i want go SWITCHEROO. you
can help me for this ?
Hi.
I need a wiring diagram guitar Yamaha RGX 1212A
2014 G&L legacy HB. In middle pic-up position, pic-up goes dead when string touch's it. Is this something to do with phase switch on humbucker?
Does not happen on import series, with out switch.
I've replaced everything! Seems to be a polarity thing.....?
"HELP"
Nice place you have here. Was member of Music Electronics forum (still am), but pedestrian, "regular" wiring; some creative, some. My request would be ask if you can help me with a diag for a Fender Telecaster with a 5-way, Strat switch; (1st pos) Standard non-stk'd coil, w/pol micro on/on sw, [mounted between VOL knobs, not linked to 5-way at all.] (2nd pos) neck and bridge put together (3rd pos) HB, parallel (4th pos), SC (5th pos) HB, series.
I've been to 60, but took my guitars apart early; to shim the neck for lower action, f'rinstance; a 3/4 National was me first, besides a small covey of acoustics that were never able to hold or even get to, "TUNE". As I got older and braver and with a crazier bunch of fellows, nothing was off limits to experiment with. Running the preamp out, into the input on another amp was an early remod, until it died a terrible electrical death. AND, we didn't burn down anything important!
Out of common courtesy, I didn't want to come in cold and start asking a bunch of favors, but one. The Tele re-wire. The humbucker in the plan is the most hideous pup I've ever seen: the S/D STK T2b, 4-way/gr @ 21 ohms!!!! The Warman (UK)tri-coil G-rail only comes close.
Pardon the interruption. Nice meeting all of you!
Read 535 comments
Add review/comment