it's not there Behringer VMX 1000 PRO MIXER

Behringer VMX 1000 PRO MIXER





BEHRINGER PRO MIXER VMX 1000, Prof. 7-channel ultra low-noise DJ mixer with state-of-the-art phono preamps, intelligent dual auto-BPM counter, Super-smooth ULTRAGLIDE faders with up to 500,000 life cycles, Awesome XPQ stereo surround effect, VCA-controlled crossfader for utmost reliability and smooth audio performance, adjustable crossfader curve for all mixing styles, 3-band kill EQ (-32dB) with EQ on/off switch on stereo channels, gain control and precise level meters per channel, Monitor function with PFL/main balance control and split option, Auto-talkover function with separate depth and sensitivity control, Subwoofer output with adjustable x-over frequency and level control for separate bass amplification, balanced main and additional zone outputs, 5 dual input stereo channels, 2 ULN microphone channels with “MIC ON” switch and effects send facility, dedicated FX loop for connecting external devices (sampler, effects processor etc.), Phono inputs on channels 1 - 3 can be switched to line level, Gold-plated RCA sockets for excellent audio quality, Ultra-rugged construction ensures long life, even under the most demanding conditions, 107mm x 483mm x 223mm, 3,6 kg
BEHRINGER PRO MIXER VMX 1000, Prof. 7-channel ultra low-noise DJ mixer with state-of-the-art phono preamps, intelligent dual auto-BPM counter, Super-smooth ULTRAGLIDE faders with up to 500,000 life cycles, Awesome XPQ stereo surround effect, VCA-controlled crossfader for utmost reliability and smooth audio performance, adjustable crossfader curve for all mixing styles, 3-band kill EQ (-32dB) with EQ on/off switch on stereo channels, gain control and precise level meters per channel, Monitor function with PFL/main balance control and split option, Auto-talkover function with separate depth and sensitivity control, Subwoofer output with adjustable x-over frequency and level control for separate bass amplification, balanced main and additional zone outputs, 5 dual input stereo channels, 2 ULN microphone channels with “MIC ON” switch and effects send facility, dedicated FX loop for connecting external devices (sampler, effects processor etc.), Phono inputs on channels 1 - 3 can be switched to line level, Gold-plated RCA sockets for excellent audio quality, Ultra-rugged construction ensures long life, even under the most demanding conditions, 107mm x 483mm x 223mm, 3,6 kg







  • Currently 3.3 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5

1: No good!

2: Average!

3: Great stuff!

4: Excellent!

5: Awesome!

Rate this product!

Currently: 65%
Total Stars: 39
Total Votes: 12

Read 15 comments

Add review/comment

⇧
Top

Category:

Products » Deejay equipment » DJ Mixer »

Added: 13 July 2004
New price: 155.78 UKP - 229.00 Euros
S/H price: ?
Company:  Behringer.com

Browse all products by Behringer

Resources

Sorry - no user manual
16 Behringer links
Behringer TD-3 audio examples
Post on forum about this product

More choices

More choices in this product category from other manufacturers

Stanton SK6

Allen & Heath XONE:32

Allen & Heath XONE:464

Allen & Heath XONE:62

Allen & Heath XONE:02

Denon DN-X400

Denon DN-X800

ECLER SMAC 42

ECLER MAC 70i

ECLER HAK 300

ECLER CONCEPT II

ECLER SMAC PRO 30
Browse:
Deejay equipment
/
DJ Mixer » Deejay equipment / DJ Mixer »




Your browsing history (edit)


behringer vmx ...

Comments

Fred

23-Nov-04

SAVE YOUR MONEY I BOUGHT TWO AND THEY DO NOT WORK!!!!


DJ MW

07-Mar-06

I run a DJ company and I have purchased 4 VMX-1000. I have had DJ's drop them even had some one spill a full drink into one and it still works. I do admit they are very quite, but they will take the abuse like a red headed step child


DJ JB

19-Mar-06

Behringer VMX1000 is a sturdy quality mixer. good functions - highly adaptable - lots of options for a board in the price range.


Paul

09-Nov-09

[quote] Fred wrote: SAVE YOUR MONEY I BOUGHT TWO AND THEY DO NOT WORK!!!! [/quote]

Is this user away with the fairies?! Where did you buy them from? I have used a Behringer VMX1000 for almost 10 years without any problems whatsoever. They are an incredible mixer, easy to use and very forgiving on a learner. Perhaps FRED should try the ON/OFF switch in the top right hand corner (THICKET!).


andrew

05-Apr-10

this is better than people think.


Chuck Haught

26-Jul-10

I own a VMX 1000 but until recently had no reason to use the microphone. Upon trying to mix the mic signal with that of music no voice signal was apparent.

Further testing without music and applying only the mic signal with the microphone switch on produced a signal on the led output metering
But NO output heard on the amp and speakers being fed by the vmx 1000.

I tried both mic channels and played with the DPT and Sensitivity controls but no result except the output meter indicated the mic signal was getting to that point.

I am able to hear music and visualize it on the output meter and I can see the mic signal deflecting the meters.

The music can be heard in the system being driven by the VMX 1000 but the voice in not heard at all.

I hope I've detailed my attempts enough to elicit some input.



Thank You
Sincerely,
Chuck


Michael Callahan

13-Nov-10

Chuck, I have the exact same problem/question as you. How do you
record/mix the mic signal? I have tried everything you have but still
can't get the mic input recorded. Help, somebody, there has to be a way.

Michael


machinemademan

24-Dec-10

terrible mixer. pro features but they are low quality. bpm counters are for show... signal meters are inaccurate... so hot that it has distortion even at 0 gain output.. mic inputs so hot they are barely useful. if you do not care at all about sound quality then this mixer is great. just make sure you turn it on before connecting to PA or you may hurt someone. I couldnt wait to replace this. ill take a stripped down denon or allen and heath zone 22 over this piece of junk any day.


dave

08-Jan-11

I own a VMX 1000 and I am trying to use the microphone. Upon trying to mix the mic signal with that of music no voice signal was apparent.

Further testing without music and applying only the mic signal with the microphone switch on produced a signal on the led output metering
But NO output heard on the amp and speakers being fed by the vmx 1000.

I tried both mic channels and played with the DPT and Sensitivity controls but no result except the output meter indicated the mic signal was getting to that point.

I am able to hear music and visualize it on the output meter and I can see the mic signal deflecting the meters.

The music can be heard in the system being driven by the VMX 1000 but the voice in not heard at all.
can any one help plase.



Thank You
Sincerely,
dave


Mada

17-Jan-12

[quote] Fred wrote: SAVE YOUR MONEY I BOUGHT TWO AND THEY DO NOT WORK!!!! [/quote]
I agree, save your money, I have one and have not been able to use it for 2 years now, microphone problems. and no support from behringer whatsoever.


mada

17-Jan-12

same problem, did you find a fix for that. I would appreciate the help. thanks





Last added comment


DJ T

14-Apr-13

Hi everyone,
I also am unfortunate to own a VMX 1000 Pro, (Can't see why they call it that) well, as far as I'm concerned it is a cheap piece of S*** , sound quality is very wimpish, the controls feel cheap and nasty, very low output even with the levels on the back wound right up. Like people have said on here the microphone input is basically shocking. I bought this as a backup unit about 3 years ago and as far as I'm concerned, its not a patch on my old KAM KAP 1500 and other KAM mixers which I have had for many years and are still working perfectly. I've also noticed The VMX 1000 gets rather hot on the back to the point where it smells quite funky, its not just mine, a mate has one too and its the same. Its been living in my loft for the last 2 years now, so..... my opinion, BEST PLACE FOR IT. :-)
Respect Everyone, DJ T.


Add a review or comment

527280
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.