it's not there
Traditionaly, a vocoder, is an effect which takes two inputs, an instrument (carrier) and a voice (modulator), and superimposes vocal effects over the instrument. This is achieved by the use of a bank of filters, which divide the signals into various bands of the audio spectrum. Driving the modulator input, either by speaking into a microphone, or driving it by a recorded voice, or other signal, excites particular audio bands, causing the vocoder to excite the corresponding frequencies in the instrument signal..... Naturally, the treated signal can be anything, as can the driver signal that effects it
On this model, the carrier can be either an internal VCO or external line input, whilst both line and mic inputs are given for the modulator signal, (the signal that manipulates the carrier)
The PC-330 has eleven filter bands each with it's own level knob on the front panel. The final output can contain any mix of modulator, carrier, vocoded signal and a special filtered version of the signal.....
The FAT products are distributed WW by Turnkey/Soho Soundhouse in London,.... I've included a link below direct to the PC-330 page..... You can order one if you want. They do credit card mail order.... tax free WW as far as I know....(nope I don't work for them.... but if you want one, that's the only place to get it!)
Anyhow.... How does it sound ?....... Here's an RA file to listen to.....
very cheap.....and let's face it....what's the choice outside of this ??
Well, you also have Music and More VF11 which have
almost identical specs, or you could use an effect
like Zoom 1201 or Boss SE-50, with vocoder patches...
yup......there was also the PIAA or whatever 'FATMAN'..... i thiunk it came as a kit or built..... dunno if they still do it or exist at all.....
help??? im in the states...so what is the best way to
buy this unit.....please respond
to that one bro in the states there is only one place to get it and its brother the VF-11 from M-M.
there located in utah named Eurosynth.
www.xmission.com/~synth/
besides his prices are better than ANYONE in the U.S
if your looking for a bunch of KNOB friendly boards,new that is.
Get the paia info from www.paia.com
I dunno how good the voder is but it has
8 bands and a send/rtn and fuzz and is $99
$25 for a rack case
If you have one let us know what it sounds like
ps also try the cyclonix s/w vocoder - it rocks
PC-330 this looks a lot like the MAM VF-11
PLEASE SEND ME INFO ON THIS VOCODER. I WANT TO ACHIEVE THAT ZAPP AND ROGER TALKBOX SOUND. I WANT TO BUY THIS, BUT ONLY IF I CAN USE A TALK BOX WITH IT!
216-921-1792
RON WOODS/ERP7420@AOL.COM
13306 BARTLETT AVE
CLEVELAND OH
44120
The PCP330 looks really good.
I'd really appreciate some more information
address:
35 Raven St
Derby
DE22 3WA
Haloo
I' am Alexei. Decided to pass on your Web-side.
much interest that, as to musics and instruments.
Heard much useful on new developments sound labs..
In russia beside musicians such no. All deals by hands...
Thank you.
Shall raise its level in the world of music.
Russia
Perm
Kuibyshewa st. 64 cabinet # 117
TEL (3422) 332919 (Pol. Department)
Lieutenant Loktionov A.V.
I live in Canada and I want to lease the PCP vocoder. but no one in Toronto carries it, can you guys help us out.
The "Eurosynth" URL doesn't seem to exist on xmission anymore...any ideas?
EVEN THOUGH ITS NOT LISTED HERE(OR THAT I CANT FIND IT)I OWN A F.A.T. tHC-00 RESINATOR.IT COST £169 FROM TURNKEY. I FOUND THAT ITS NOT VERY GOOD AT HANDLING BASS AND AFTER TWO WEEKS OF USING IT THE RESONANCE CONTROL CRACKLED, TURNKEY ADVISED SPRAYING WD-40 ON IT WHICH I DIDN'T LIKE THE SOUND OF, CAN ANYONE RECOMMEND ANYTHING ELSE. OTHER THAN THAT IT IS AN ALRIGHT FILTER AND GOOD AT MAKING THINGS IN TO JELLY.
ME AGAIN, IN FACT THE THC00 HISSES LIKE A BASTARD, DONT BUY IT.
Didnt like it much,the vocoder on the sirius or jp8080 is actually beter.
Also the digitech talker is of a higher spec..
And about the resinator, it actually more of a lfo box and not a true rez filter is fun though but on't use the volume control (with a high level) on the rack itself unless you like the soun of surf...
I've got a resinator too... big pile of homemade doo doo that creates ground hum if you touch the case at all, really bad noise level, and as badly made as all of the FAT product range.
I've got a freebase too which is el-krapo and used to have the MAM version of this vocoder, which was utter turd.
The worst garage-made equipment ever. Avoid!!!!
carefull when you use my email ^^
An intlleigent answer - no BS - which makes a pleasant change
I just got a used PCP 330 with no power supply. It only says 12v AC, but no mention of amps. Does anyone know what the correct amps would be, and does anyone know where I could locate the manual?
Thanks,
Bob
Read 19 comments
Add review/comment