The highly successful V3 is a handy one into three MIDI thru unit, which you can use to convert one MIDI out into three buffered parallel outs. The V3 MIDI Thru Unit is very compact - just 58mm x 69mm x 23mm.
In the example diagram, the sequencer is the MIDI master device. MIDI commands from its MIDI Out port must arrive at the MIDI In ports of all three slave devices (sampler, sound module and synth). The V3 MIDI thru box generates three 'thru' copies of the signal arriving at its input, each capable of driving one of the slave devices.
Power options You can use a PP3 (6F22) 9V battery to power your V3 MIDI Thru Unit- the battery will give a very long life (usually a year or more in normal use. When you leave the IN socket unconnected, or your MIDI master device is quiescent or switched off, no battery power is consumed.
You can use and external 6Vdc to 9Vdc supply to power your V3 - you'll have to make connection via a PP3 type snap (press stud) connector with the negative voltage on the male stud. The current demand is just 10mA maximum.
You simply slide out the top side panel to fit the battery or the connection from the battery eliminator.
0 comments
Add review/comment