TERRATEC PHASE 88 Rack Firewire, Firewire Audio-Interface 19" 1 HE, 24 Bit/96 kHz, 8 analog I/O´s Jack, 2 Midi I/O´s, optical SPDIF I/O, 2 x Mic-Inputs XLR, Wordclock I/O, for Windows and Mac
Open large PHASE 88 Rack FW front-panel image Open large PHASE 88 Rack FW rear-panel image High class performance with alternative PCI or FireWire interface: The PHASE 88 Rack is the flexible audio center for your home or project studio. With the TerraTec Producer series 24 Bit/96 kHz PHASE 88 Rack PCI audio system, you are well-equipped to handle any tasks in your home or project studio, now and in the future. Eight analog inputs and outputs (balanced ¼" jacks) give you the room and technology you need, even for larger recording sessions. All inputs can be controlled individually via gain controls on the front panel and feature clipping LEDs to warn of unintended distortion. Two of the channels can be adapted to microphone use at the press of a button - with XLR connectors and switchable 48 V phantom power. A two-channel digital I/O (S/PDIF) with coaxial (PCI version) or optical (FireWire version) connectors is available for your DAT recorder and other digital equipment.
A WordClock I/O ensures optimal synchronized connections to external digital equipment, and two independent MIDI interfaces give you 32 MIDI channels to work with. If you ever need more connections than the standard selection of the PHASE 88 Rack system, thats no problem:Up to four PCI devices can be cascaded with a single driver, giving you no less than 40 audio channels for simultaneous use. Thanks to its sophisticated board design and proven converters, the system delivers outstanding audio quality: a signal-to-noise ratio of 110 dB (A) speaks for itself. The PHASE 88 Rack PCI system also is future-proof: if necessary, you can easily replace the rack module’s PCI connection with an optional FireWire (IEEE 1394) interface.
19" module - External 19" device (1U) with PCI or FireWire (IEEE 1394) interface
- 8 balanced analog ¼" (TRS) input jacks
- 8 balanced analog ¼" (TRS) output jacks
- 8 gain controllers on the front side (20 dB adjustment range)
- 8 input signal and clipping LEDs on the front side
- 2 XLR/¼" jacks microphone inputs (front side) as alternatives to line inputs 7 and 8
- Inputs 7 and 8 switchable between line/instrument and mic level
- 48 V phantom power switchable to the microphone inputs
- External power supply, 230V/50Hz or 110V/60 Hz to 12V AC
- 2 separate MIDI interfaces with 5-pin DIN connector
- 24 Bit/96 kHz A/D converters with 100 dB (A) SNR*, typically 100 dB (A) @ 48 kHz
- 24 Bit/96 kHz D/A converters with 110 dB (A) SNR*, typically 109 dB (A) @ 48 kHz
- WordClock I/O
PHASE 88 Rack - PCI version - PHASE 88 PCI card
- 4 m cable to the PHASE 88 Rack module
- 10 inputs and 10 outputs in total
- 20 channel hardware mixer
- Digital input with 2 channels (coaxial S/PDIF, 24 Bit/ 96 kHz)
- Digital output with 2 channels (coaxial S/PDIF, 24 Bit/ 96 kHz)
- None-Audio Mode for transferring AC3 or
- DTS via the digital output
- Hardware VU-Meter for each channel (displayed in the control panel)
- Busmaster transfer supports 24 Bit 4 Byte mode (32 Bit)
- EWS -Connect link**
PHASE 88 Rack - FireWire version - IEEE-1394 FireWire interface for PC/Mac
- 2 high-speed FireWire™ ports
- Advanced DSP hardware monitor mixer
- 10 inputs and 10 outputs in total
- Digital input with 2 channels (optical S/PDIF, 24 Bit/ 96 kHz)
- Digital output with 2 channels (optical S/PDIF, 24 Bit/ 96 kHz)
- None-Audio Mode for transferring AC3 or
- DTS via the digital output
- Stand-Alone operation mode
Read 2 comments
Add review/comment