2 X 10 Midrange & High Frequency Cabinet
Ask a question about this subject?
Post a question direct to our forums and get mailed when a reply is added!
There are 9 viewer comments posted to this page - Read

Author: admin
Date: 04-Sep-08
2 X 10" Mid/High cabinet for use with Bass-bins for systems up to 500 Watts.
Here's a simple 2 way mid/HF unit you should be able to knock up in an day with some care. Don't use this with more powerful systems/amps.... this unit is for up to 500 Watt passive systems.... (Go for the 2 X12" mid-cabs for an active system).
These are piss-simple and ideal to go with the Folded bass-bins listed back at the main page... These and the bass-bins should give plenty of poke for venues like small clubs, bars etc.....
Check with the speaker supplier for the cross-over you need.... One at the front end to filter the incoming signal, and another to bridge to the tweeter.
LOUDSPEAKERS | 2 x 10" MIDRANGE BULLET TWEETER with associated cross-over |
PERFORMANCE | Frequency response from 400 Hz to 20 KHz and sensitivities from 99 db to 104 db related to the speaker models selected |
CONSTRUCTION | Fairly simple. easy-peasy mate |
MATERIALS | 1/2 sheet of X 18mm / 3/4" 8' X 4' board (2438 X 1219) |
VOLUME | Total= 8800 cubic inches Reflex= 6650 cubic inches, 106 litres |
SPECIAL NOTES - PORT SIZE
RESONANCE OF LOUDSPEAKER | PORT AREA |
---|---|
40 HZ | 10 sq inches |
45 HZ | 12 sq inches |
55 HZ | 24 sq inches |
60 HZ | 33 sq inches |
CLICK TO VIEW & DOWNLOAD THE PLANS
[plans will print out to an A4 page]
CLICK TO GO TO CONSTRUCTION TIPS PAGE
(very important to read this !!)
Good luck with it! - Happy building!
COMMENTS FOR:
'2 X 10 Midrange & High Frequency Cabinet'There are a total: 9 comments posted to this page.
Name: ERIK
Email:
Activity: Professional
Date: 30-Dec-99
I can tell your site is going to help me. However one thing I was hoping to see was an inner structure. Like perhaps looking down on one of your speaker cabs with no top. Of course they are simple enough. If you could help Im trying to find plans to build a duel 18" sub with a reversed speaker. If you have any ideas Id like it. Thanks
I put three score because I dont visit any other sites. Best stay nutral ya know.
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: ERIK
Email:
Activity: Professional
Date: 30-Dec-99
I can tell your site is going to help me. However one thing I was hoping to see was an inner structure. Like perhaps looking down on one of your speaker cabs with no top. Of course they are simple enough. If you could help Im trying to find plans to build a duel 18" sub with a reversed speaker. If you have any ideas Id like it. Thanks
I put three score because I dont visit any other sites. Best stay nutral ya know.
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: k
Email:
Activity: Professional
Date: 30-Dec-99
test add comments to '2x10 & hf cab' page
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: kilo
Email:
Activity: Professional
Date: 30-Dec-99
sorry.... fixed the plan... it is now correct
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: Daniel
Email:
Activity: Hobby-ist
Date: 30-Dec-99
Hi can you help me please with sending me a plan of a cab
for an 18" speaker ?
If yes ,please the type of cab must be a bass bin and frequency respone between0hz and 300hz.
It is important to me that the freq response ,that is0hz to 300hz, must be over 100db.
Thank you.
Regard your construction it seen quite good.
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: Jonathon Garrod
Email:
Activity: part-timer
Date: 30-Dec-99
The link to the plans for the 2x10 mid/hi brings up
plans for the full range cab! Other than that tho,
gr8 site! Any chance you could put up zips of the full
plans for each cab in html, as this 'puter locks up
when I print from netscape! (then I could print it
straight off on a friend's computer whilst not running
their fone bill up!
Thanxx a lot M8
Cya l8rz...
-DJ Panic
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: kilo
Email:
Activity: Professional
Date: 30-Dec-99
testing...1.....2......3......
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: earthworm
Email:
Activity: Hobby-ist
Date: 18-Apr-06
hi, looking at the plans and then at the special notes and dont understand cos i cant see a port hole but there are notes here which suggests there are?
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Last added comment
Name: Geoff
Email:
Activity: Professional
Date: 19-Dec-13
There seems to be a problem with the construction link
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
'2 X 10 Midrange & High Frequency Cabinet'
Note: To cut down on spammers, cookies must be enabled to post comments to this page.
[back to top]