15 inch Celestion W-Bin
Ask a question about this subject?
Post a question direct to our forums and get mailed when a reply is added!
There are 18 viewer comments posted to this page - Read

Author: admin
Date: 04-Sep-08
Celestion 15" bass W-Bin design - Use MDF or ply - if you dont have a router to cut the guide grooves for the inner panels, then use batons as the plans say to keep them in place.
To build this you gotta build the middle bit on top of one side so to speak, then drop the other side on top - the inner chambers are held in place by the side panels in esssense... then add top/bottom/rear panels etc - line-up is important therefore and you need to dry-test fully and mirror the guides on either opposing panel.
Check it out, and good luck!
CLICK TO VIEW & DOWNLOAD THE PLANS
[plans will print out to an A4 page]
CLICK TO GO TO CONSTRUCTION TIPS PAGE
(very important to read this !!)
Good luck & happy building!
COMMENTS FOR:
'15 inch Celestion W-Bin'There are a total: 18 comments posted to this page.
Name: kilo
Email:
Activity: Professional
Date: 30-Dec-99
testing...1.....2......3......
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: ghost
Email:
Activity: Hobby-ist
Date: 06-Mar-05
there is no protective covering in the design of this cab. rodents can go inside and damage the speaker.. besides its looks bare with out any cover... well you know..
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: Mikey
Email:
Activity: Professional
Date: 23-Oct-05
Quote: "there is no protective covering in the design of this cab. rodents can go inside and damage the speaker.. besides its looks bare with out any cover... well you know.." ..... BEST SOLUTION: GET RID OF THE RODENTS!
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: stevie
Email:
Activity: Hobby-ist
Date: 21-Nov-05
i'd love to see a rodent when the bass is cranked. hehe
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: Andy
Email:
Activity: part-timer
Date: 03-Oct-06
I built this (plus a few of my own modifications) for a PA system me and a friend are knocking together, we have used it a few times it sounds great - absolutely perect after a few tweaks! Thanks a lot!
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: Mike Wetzel
Email:
Activity: part-timer
Date: 07-Jan-07
Awesome, This is such a valuable servies.
I do thank you sir for your time and attention.
I'd love to return the favor if you email back.
Thanks Again.
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: savyb
Email:
Activity: Professional
Date: 06-Feb-07
i have the 18inch versionk the place and they rocck
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: savyb
Email:
Activity: Professional
Date: 08-Feb-07
mad basses they rock the place i have the excact same but the 18inch R.C.A thunder bolts earthshakers there double loaded and i have two cabs used them for over 30 years. my dad bought them 30 odd years ago and are still working the best driver to use is fane colosus 18inch
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: Viv Jocumsen
Email:
Activity: Professional
Date: 08-Feb-07
I have been using this design now in two bins for over ten years in sound system for a rock band with 600 watt drivers and the bins perform so well in all venues we have used them in....they do thump quite well
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: Deshin
Email:
Activity: Hobby-ist
Date: 30-Apr-08
Good stuff ,tried and tested ,i fully approve of this w bin
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: jim
Email:
Activity: Hobby-ist
Date: 26-Jan-10
whats the removable rear panel for?
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: admin
Email:
Activity: Professional
Date: 26-Jan-10
so you can access/fit & remove or renew the speaker
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: James
Email:
Activity: Hobby-ist
Date: 05-Nov-11
What kind of frequencies are these ideal for?
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: Phox
Email:
Activity: part-timer
Date: 10-Feb-12
Hey! Can I throw and 18 in this cab or would it spund like turd. I cant find much 18 pland but 15's. I want more (well add) more UMPH to my system. thanks
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: daryl graham
Email:
Activity: Professional
Date: 29-Jul-12
I like to make some 15' celestial w-bass cabinet need some help can you email me the way how to make a pair of speakers
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: pawel
Email:
Activity: Professional
Date: 06-May-14
What kind of tweeks have u done?
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Name: amos elliot
Email:
Website?: www.dancetech.com
Activity: part-timer
Date: 15-Mar-16
indeed the 15 dual bin looks perfect but how powerful is t for an out door function. how can i get a 2x15 design
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
Last added comment
Name: Hardtekhippy
Email:
Activity: Professional
Date: 03-Apr-18
does anyone know how many sheets of ply it takes to make these bins???
Article rating out of 5: ![]() |
Article 'ratings' were added September 2008, so most articles have no viewer rating
'15 inch Celestion W-Bin'
Note: To cut down on spammers, cookies must be enabled to post comments to this page.
[back to top]