Forums - Synths & synthesis
Subject: 101 sync?
Viewing all 13 messages - View by pages of 10: 1 2
Original Message 1/13 10-Jul-00 @ 10:03 PM - 101 sync?
to trigger the external clock in of my 101 at one note per quater note,
effectively making a sixteen step sequencer of the 101/per bar (up
to 100 steps isn't it?).
I know this set up should work, because I have done it before, but I
can't figure it out. I have even gone as far as to resolder the clock
in jack. I know it is recieving a signal as if I plug the cable into
my mixer, I get the notes. And I know the sequencer is working,
because when I unplug the clock in cable, the internal clock takes
over and plays the sequence.
So what could be causing the sequence not to work from an external
clock?
Cheers.
Message 2/13 11-Jul-00 @ 12:30 PM - RE: 101 sync?
Message 3/13 13-Jul-00 @ 01:26 AM - RE: 101 sync?
When the audio cable is plugged directly into my mixer, it gets the rimshot signal, so I know that is working (as far as to the end of the audio cable). This leads me to think that it must be the 101. Unless the signal is just not strong enough, but like I said, it has worked before with this set up.
Sometimes I wonder at my suitability with electronics... ;}
Message 4/13 13-Jul-00 @ 01:07 PM - RE: 101 sync?
Message 5/13 13-Jul-00 @ 02:33 PM - RE: 101 sync?
The ONLY way I know how to trigger the 101 perfec2tly is to use the 909 or 606 and send the low/tom or the rim shot out of the 909 to external clock in on the 101. As you are doing, BUT you have to step in ALL 16 steps in the 909. Or you'l drift like a trainwreck, unless your purposely trying to get that syncopated effekt. But if you want true 16 step XOX sequences from the 101 you have to do it this way...
Message 6/13 14-Jul-00 @ 01:39 PM - RE: 101 sync?
Message 7/13 14-Jul-00 @ 03:22 PM - RE: 101 sync?
Message 8/13 17-Jul-00 @ 04:31 AM - RE: 101 sync?
Systems are GO!
Message 9/13 24-Jul-00 @ 05:57 AM - RE: 101 sync?
-M-
Message 10/13 24-Jul-00 @ 01:19 PM - RE: 101 sync?
There are basically two ways to sync the 101:
1. triggering the internal sequencer with a drummachine
2. using a midi2cv converter. In this case the internal sequencer would be useless. But you would be able to use the MPC2k instead
Message 12/13 25-Jul-00 @ 03:34 AM - RE: 101 sync?
Message 13/13 25-Jul-00 @ 12:33 PM - RE: 101 sync?
Viewing all 13 messages - View by pages of 10: 1 2
There are 13 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum