Forums - Synths & synthesis
Subject: Micro-Q is out!!
Viewing all 42 messages - View by pages of 10: 1 2 3 4 5
Original Message 1/42 01-Nov-00 @ 01:18 AM - Micro-Q is out!!
Message 2/42 01-Nov-00 @ 08:59 AM - RE: Micro-Q is out!!
Personally, I'm torn between buying an XT or a Micro Q. I really need the real-time control but the Micro Q would rock, sound-wise.
Oh, I have a question too: I'm mostly interested in the wavetable-synthesis (what I really need at the moment is something that can create long, evolving soundscapes and wavetable synthesis does exactly this) so is there much difference in the sound quality and diversity between the XT and the Q range when it comes to wavetables?
Message 3/42 02-Nov-00 @ 02:40 AM - RE: Micro-Q is out!!
Message 4/42 02-Nov-00 @ 09:02 PM - RE: Micro-Q is out!!
Message 5/42 02-Nov-00 @ 09:40 PM - RE: Micro-Q is out!!
In my opinion, if you want a wavetable synth, get a Microwave. The XT-30 voice isn't much more than the XT-10.
www.musicians-gear.de
-Craig
Message 7/42 04-Nov-00 @ 01:29 PM - RE: Micro-Q is out!!
Wavetables even if it only has 2, and
that is they are much smoother when
going through the transition,
microwave can sound a little jumpy
or clicky sometimes when scrolling
through the wavetable..
Message 8/42 04-Nov-00 @ 01:32 PM - RE: Micro-Q is out!!
Wavetables even if it only has 2, and
that is they are much smoother when
going through the transition,
microwave can sound a little jumpy
or clicky sometimes when scrolling
through the wavetable..
Message 9/42 04-Nov-00 @ 01:32 PM - RE: Micro-Q is out!!
Wavetables even if it only has 2, and
that is they are much smoother when
going through the transition,
microwave can sound a little jumpy
or clicky sometimes when scrolling
through the wavetable..
Message 10/42 04-Nov-00 @ 01:34 PM - RE: Micro-Q is out!!
Wavetables even if it only has 2, and
that is they are much smoother when
going through the transition,
microwave can sound a little jumpy
or clicky sometimes when scrolling
through the wavetable..
Message 11/42 04-Nov-00 @ 01:44 PM - RE: Micro-Q is out!!
Wavetables even if it only has 2, and
that is they are much smoother when
going through the transition,
microwave can sound a little jumpy
or clicky sometimes when scrolling
through the wavetable..
Message 12/42 04-Nov-00 @ 01:46 PM - RE: Micro-Q is out!!
Wavetables even if it only has 2, and
that is they are much smoother when
going through the transition,
microwave can sound a little jumpy
or clicky sometimes when scrolling
through the wavetable..
Message 13/42 04-Nov-00 @ 01:46 PM - RE: Micro-Q is out!!
Wavetables even if it only has 2, and
that is they are much smoother when
going through the transition,
microwave can sound a little jumpy
or clicky sometimes when scrolling
through the wavetable..
Message 14/42 04-Nov-00 @ 01:53 PM - RE: Micro-Q is out!!
Wavetables even if it only has 2, and
that is they are much smoother when
going through the transition,
microwave can sound a little jumpy
or clicky sometimes when scrolling
through the wavetable..
Message 15/42 04-Nov-00 @ 04:10 PM - RE: Micro-Q is out!!
Message 16/42 05-Nov-00 @ 01:31 AM - RE: Micro-Q is out!!
Message 17/42 05-Nov-00 @ 07:05 PM - RE: Micro-Q is out!!
-
![](smiley.gif)
Oh yeah I was wondering do Q synths have bugs?can you play stacked oscillators in the patches and is there a mono/unison mode?Like if it has 25 voices can I use it as 5 5 OSC monosynths w/ portamento?Or does it have poly portamento.So basically can i allocate the voices for each patch or do they always play however many keys you press?How deep is the micro q dimension wise not musically?Is it actually out or just showing on a screen or in a zine near you?
-:0 can i play it w/ 1 finger?and then maybe hit another note with the other finger on my other hand and have it bounce back to the original note if i dont lift my other finger?
Message 18/42 06-Nov-00 @ 10:21 PM - RE: Micro-Q is out!!
Velocity sensing knobs: They respond to the speed of the turn , so when moving them fast you end up jumping ahead in varying positions making it very hard to return to the same spot. They don't repond like a normal analog knob. The actual position jumps all over the place when you try and tweak it fast. They rotate 360 degrees and the actual position changes based on how fast the knob is turned. So, the only acurate tweaks are done slowly. I slow down the song and record them at 80bpms, and then return the song to it's normal speed, but some of the feel is lost. It's my only complaint. Fuck all those knobs, they're a waist of space. Convienant for editing patches, but not for real time control over a sweet spot in the filter. Use another controler. I'm looking into the Kenton Control freak. The Q has the same knobs as the XT. I e-mailed a letter to Waldorf complaining about this very unatural and un benificial feature,and requested it be updated in a new OS if Possible. They did not respond.
Message 19/42 06-Nov-00 @ 10:29 PM - RE: Micro-Q is out!!
Good VA's:
Of coarse the Q, Nova, Virus, and very impressive, but with limited polyphony, the korg ms-2000. It sounds great. BT uses 3 of them, two hooked up in poly mode to increase the voices to 8.
I'm more interested in new analogs now. Andromeda is almost here!
Message 20/42 07-Nov-00 @ 12:52 AM - RE: Micro-Q is out!!
perhaps its just the wavetables that are updated... no actual sounds. like you'd have to switch the wavetable knob to use the higher-numbered settings.
Message 21/42 07-Nov-00 @ 12:56 PM - RE: Micro-Q is out!!
ashley
Message 22/42 07-Nov-00 @ 04:42 PM - RE: Micro-Q is out!!
Message 23/42 07-Nov-00 @ 04:50 PM - RE: Micro-Q is out!!
Message 24/42 07-Nov-00 @ 08:44 PM - RE: Micro-Q is out!!
Message 25/42 08-Nov-00 @ 09:26 AM - RE: Micro-Q is out!!
There you go. Happy Christmas =]
skb
Message 26/42 08-Nov-00 @ 01:55 PM - RE: Micro-Q is out!!
I agree, you just can't fast switch to a certain amount.. but then again it aint THAT big a deal when track writing. You just have to get your hands dirty with some editing in the sequencer.
Live use, ok that's another story.
Message 27/42 09-Nov-00 @ 06:40 AM - RE: Micro-Q is out!!
-:0 i see a problem
Message 28/42 09-Nov-00 @ 07:14 PM - RE: Micro-Q is out!!
Ape
Message 29/42 09-Nov-00 @ 08:43 PM - RE: Micro-Q is out!!
Message 30/42 11-Nov-00 @ 12:10 AM - RE: Micro-Q is out!!
Message 31/42 11-Nov-00 @ 11:40 AM - RE: Micro-Q is out!!
Message 32/42 15-Nov-00 @ 09:05 AM - RE: Micro-Q is out!!
thanks for crippling me, i have to spend that money and i have to spend it now. is there a reason for not buying one?
Message 33/42 15-Nov-00 @ 02:48 PM - RE: Micro-Q is out!!
Ape
Message 34/42 15-Nov-00 @ 08:45 PM - RE: Micro-Q is out!!
Message 35/42 15-Nov-00 @ 11:51 PM - RE: Micro-Q is out!!
Message 36/42 16-Nov-00 @ 12:05 AM - RE: Micro-Q is out!!
Message 37/42 16-Nov-00 @ 03:30 AM - RE: Micro-Q is out!!
by the way, I dont buy it... looking at their page.. $2007 in US dollars for a Kurzweil K2600R??? No frickin' way...
Message 38/42 16-Nov-00 @ 05:18 AM - RE: Micro-Q is out!!
Ape
Message 39/42 16-Nov-00 @ 06:05 AM - RE: Micro-Q is out!!
Message 40/42 16-Nov-00 @ 09:32 PM - RE: Micro-Q is out!!
all that good, and I suspect it's got
something to do with where the gear is
made. EU/German built stuff is mad
cheap, but Korean/Japanese/US gear
isn't, because the retailer has already
eaten the cost of importing the unit and
must pass that on to the consumer.
But for Waldorf and Access, especially,
the prices are looooowwwwww...
-Craig
Message 41/42 17-Nov-00 @ 09:22 PM - RE: Micro-Q is out!!
i still dont beleive the kurz K2600R for $2007...
Message 42/42 18-Nov-00 @ 10:44 PM - RE: Micro-Q is out!!
Ape
Viewing all 42 messages - View by pages of 10: 1 2 3 4 5
There are 42 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum