asus a7v mobo q. - Computer music & technology forums

Forums - Computer music & technology

Subject: asus a7v mobo q.

Viewing all 15 messages - View by pages of 10: 1 2

Original Message 1/15 21-Jan-02 @ 04:55 PM - asus a7v mobo q.

bedwyr

Posts: 2890

Link?: Link

File?: No file

hello,

i've got an asus a7v mobo with the via apollo kt133 chippset, 200mhz fsb pc133 dram. ok?

my question is can i put a thundebird 1.5ghz on it? i've looked at the asus site and it says the mobo will take athlon thunderbird / athlon duron 330 - 1000 mhz.

does that mean that it won't take durons over 1ghs only? or that it won't take either over 1ghz?

btw it says nothing in the mobo manual. i've emailed asus but no reply as yet. and btw i can overclock my processor up to 1.2 ghz but is there any point if the mobo won't take it?

cheers, bedwyr.

[ back to forum ] [quote]

Message 2/15 21-Jan-02 @ 05:25 PM - RE: asus a7v mobo q.

dARKSTATe

Posts: 1584

Link?: Link

File?: No file

No idea Bedwyr... For what its worth, I shelled out around �90 for a newer 266A based board, supports DDR RAM, ATA100 and the newer, faster "Athlon XP" Palomino-core based CPUs (they run much cooler than a Thunderbird 1.5 which runs DAMN hot!)

Hope this helps..

[ back to forum ] [quote]

Message 3/15 21-Jan-02 @ 08:16 PM - RE: asus a7v mobo q.

bedwyr

Posts: 2890

Link?: Link

File?: No file

it does sort of help, but i can get the 1.5ghz processor for a swap, & there's no point getting it if my mobo can't handle it. guess i'll have to wait for the asus reply.

[ back to forum ] [quote]

Message 4/15 22-Jan-02 @ 09:34 AM - RE: asus a7v mobo q.

dARKSTATe

Posts: 1584

Link?: Link

File?: No file

If you end up getting the 1.5 in some kind of system, don't forget bollock loads of cooling (good thermal pasted and an "AMD approved" CPU fan is definately a recommendation, as well as making sure the VCore voltage on your mobo isn't set too high...)

The AMD list is here:

http://www.amd.com/us-en/Processors/ProductInformation/0,,30_118_756_759^1039^1050,00.html

[ back to forum ] [quote]

Message 5/15 22-Jan-02 @ 09:36 AM - RE: asus a7v mobo q.

bedwyr

Posts: 2890

Link?: Link

File?: No file

thanks, i'll have a look. tho i seem to remember getting a supa-dupa fan in the first place.

where's my screwdriver?

[ back to forum ] [quote]

Message 6/15 22-Jan-02 @ 11:55 AM - RE: asus a7v mobo q.

Posts: 12353

Link?: Link

File?: No file

A1200 (200 FSB)

A1100 (200 FSB)

A1000 (200 FSB)

A0950 (SKT)

A0900 (SKT)

A0850 (SKT)

A0800 (SKT)

A0750 (SKT)

A0700 (SKT)

___________________________________

I had an idea for a script once. It's basically Jaws except when the guys in the boat are going after Jaws, they look around and there's an even bigger Jaws. The guys have to team up with Jaws to get Bigger Jaws.... I call it... Big Jaws!!!

[ back to forum ] [quote]

Message 7/15 22-Jan-02 @ 11:56 AM - RE: asus a7v mobo q.

Posts: 12353

Link?: Link

File?: No file

A1200 (200 FSB)

A1100 (200 FSB)

A1000 (200 FSB)

A0950 (SKT)

A0900 (SKT)

A0850 (SKT)

A0800 (SKT)

A0750 (SKT)

A0700 (SKT)

that's the A7V supported chips... the athalon 1500 is the MP chip and requires a different board supporting 266mhz fsb.

___________________________________

[ back to forum ] [quote]

Message 8/15 22-Jan-02 @ 01:04 PM - RE: asus a7v mobo q.

bedwyr

Posts: 2890

Link?: Link

File?: No file

cheers k, i'll just overclock it for now then. 90 quid isn't much for a new mobo though.

what sort of temperature is safe to go to? and will 1200 be noticably better then 1ghz?

[ back to forum ] [quote]

Message 9/15 22-Jan-02 @ 02:39 PM - RE: asus a7v mobo q.

dARKSTATe

Posts: 1584

Link?: Link

File?: No file

Hang on.. Isn't Bedwyr is talking about a Thunderbird 1.5GHz, not the AMD 1500 "?P" CPU (which would need the newer mobo right off the bat??)

The newer XP & MP AMD CPUs are based on a smaller more sophisticated core, run cooler, have full support for SSEII and other funky stuff..

I know with my TBird 1.4GHz, I was told a safe "ceiling" would be around 70-75C, though with decent cooling I've had mine running (under "load") at around 52-53C... these are VERY hot running CPUs though and at the limit of that particular manufacturing technology before AMD made the switch...

[ back to forum ] [quote]

Message 10/15 23-Jan-02 @ 02:07 PM - RE: asus a7v mobo q.

bedwyr

Posts: 2890

Link?: Link

File?: No file

well, the t-bird only goes up to 1.4 with either a 200 or 266 fsb. 1.5 is a ?p thingy.

and the asus a7v isn't on the amd recommended list.

[ back to forum ] [quote]

Message 11/15 23-Jan-02 @ 02:34 PM - RE: asus a7v mobo q.

dARKSTATe

Posts: 1584

Link?: Link

File?: No file

Ah.. if its definately one of the XP or MP range then you will need the newer boards..

Anything VIA266"A" based fer starters...

"EPoX8KHa+" (�101incVAT), "AsusA7V266-E" (�141incVAT) from www.overclockers.co.uk

(And of coz you'd get support for DDR mem, AGP4x, and UltraATA100...)

[ back to forum ] [quote]

Message 12/15 23-Jan-02 @ 03:55 PM - RE: asus a7v mobo q.

bedwyr

Posts: 2890

Link?: Link

File?: No file

oh, it'll have to wait. focusrite mic pre & a little mixer for the headphone mix next. maybe i'll squezze some more ram out of my wallet instead.

will my pc133 ram be usable if i upgrade my mobo?

[ back to forum ] [quote]

Message 13/15 23-Jan-02 @ 04:28 PM - RE: asus a7v mobo q.

dARKSTATe

Posts: 1584

Link?: Link

File?: No file

Not sure if that's the 188pin stuff... if it is, you should be fine.. but you'll certainly be losing the benefits of being able to run PC2100 DDR Ram on your system with that new Mobo...

All this PC malarkey eh?? Anyone wanna sell me a cheap Wavestation A/D and an EMU Morpheus?!?!????

Whoa!

[ back to forum ] [quote]

Message 14/15 23-Jan-02 @ 04:34 PM - RE: asus a7v mobo q.

Posts:

Link?: No link

File?: No file

i added in all the links for the AMD recommended boards in the PC SECTION... you can get to it easy for reference.

[ back to forum ] [quote]

Message 15/15 23-Jan-02 @ 04:40 PM - RE: asus a7v mobo q.

bedwyr

Posts: 2890

Link?: Link

File?: No file

cheers k.

marc, no, but do you wanna buy my sblive platinum piece of shit?

i'm sticking my new rode ntk through two channels of behringer compression at full gain (no preamp) and still it's way less noisy than the mic input on the bslive.

[ back to forum ] [quote]

Viewing all 15 messages - View by pages of 10: 1 2

There are 15 total messages for this topic

Reply to Thread

You need to register/login to use the forum.

Click here to Signup or Login !

[you'll be brought right back to this point after signing up]

Back to Forum