Forums - Mixing & FX
Subject: 01V & Feedback Problem
Viewing all 7 messages - View by pages of 10: 1
Original Message 1/7 25-Apr-00 @ 09:34 AM - 01V & Feedback Problem
i hav little home studio , korg z1 ,
nordelead2 , a3000v2 , 01v.
now everything is connected and ready to
rock on , but if i put soundcards(awe64)
output to channels 15&16 and raise the volume , there comes that annoying
´iiiiiiiiiscreek´..i´ve tryed many
different connections, etc...
now i´m using those 2TR ins&outs ,
but really want get those soundcard
outs to channels...
anybody ? this is serious shit.!
thanx, anyways..
-amrz
Message 2/7 25-Apr-00 @ 06:29 PM - RE: 01V & Feedback Problem
Message 3/7 06-May-00 @ 03:40 AM - RE: 01V & Feedback Problem
Message 4/7 09-May-00 @ 12:55 PM - RE: 01V & Feedback Problem
-Craig
Message 5/7 09-May-00 @ 05:13 PM - RE: 01V & Feedback Problem
You can't use it as a mix channel.
MikeC
Message 6/7 10-May-00 @ 09:16 AM - RE: 01V & Feedback Problem
but if it ISN'T routed thru, then all i can suggest (not being a sparky), is that there is some other form of electrical earth-loop feeb back perhaps....
what i want to know is how is the mixer routed BACK TO THE PC SOUNDCARD... how is that happening?
Message 7/7 10-May-00 @ 01:55 PM - RE: 01V & Feedback Problem
probably 2 trk out -> soundcard -> 2trk in.
if you then put the soundcard -> 15& 16 instead,
15& 16 -> 2 trk out and there's your loop.
solution?
1-remove 15&16 from the main output while recording.
(solo them to hear the soundcard. or turn monitoring
(in->out loop) in the soundcard off.
2-mute the recording inputs on the soundcard
when just playing sounds.
that should work....
Viewing all 7 messages - View by pages of 10: 1
There are 7 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum