Forums - Mixing & FX
Subject: Setting MIDI-Thru on a VF-1
Viewing all 4 messages - View by pages of 10: 1
Original Message 1/4 08-Aug-00 @ 07:13 PM - Setting MIDI-Thru on a VF-1
Message 2/4 09-Aug-00 @ 11:23 AM - RE: Setting MIDI-Thru on a VF-1
like an earlier version, sort of...)
the midi out should say "midi out/thru". check the back
of the unit, if it just says "midi out" it probably doesn't
do thru. if it does...
on the se70, press "utility". on the se-70, you get a tuner.
keep pressing utility until you start getting midi stuff.
use the keys you use to move through parameters, and
you'll get different screens (left and right on the se-70),
one is midi out/thru, use the knob to change it.
hoping that it's similar....
Message 3/4 09-Aug-00 @ 08:02 PM - RE: Setting MIDI-Thru on a VF-1
Message 4/4 10-Aug-00 @ 10:22 AM - RE: Setting MIDI-Thru on a VF-1
if you need a lot of thrus, just pick up a cheap patchbay...
sometimes you can pick up a 2x8 or 4x8 (2 or 4 inputs,
8 outputs) for $20-40, and the kmx8 (a really easy to use
8x8) is around $50 nowadays. lots of other advantages to
this too, especially if you've got more than a couple pieces
of gear and/or do a lot of sysex dumping...need a sysex
dump from the vf-1 to the PC? no need to repatch cables,
or mess with midi out/thru options....just hit a couple keys
on the patchbay and voila! patch vf1 to PC, do the send,
a couple more keys and your controller is reconnected, and
vf-1 disconnected. it's actually very nice.
Viewing all 4 messages - View by pages of 10: 1
There are 4 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum