 |
 |
 |
 |
 |
 |
 |
Forums - Mixing & FX
Subject: Alesis_Microverb III
Viewing all 2 messages - View by pages of 10: 1
Original Message 1/2 06-Oct-03 @ 08:45 PM - Alesis_Microverb III [Link: Alesis - Microverb III]
on the Alesis Microverb III, i'm curious to know what the "Defeat" patch in the back of the unit is used for? thank you
Message 2/2 06-Oct-03 @ 09:29 PM - RE: Alesis_Microverb III
You mean the jack on the back of the thing? It's used to bypass the unit with a footswitch.
http://www.alesis.com/downloads/manuals/MicroVerb3_Manual.pdf
Page 3:
DEFEAT JACK
The DEFEAT JACK, located on the rear panel, bypasses the reverb signal and allows only the dry signal
at the outputs. Any SPST type footswitch (such as the reverb footswitch that sometimes comes with
amplifiers) will work for this function.
http://www.alesis.com/downloads/manuals/MicroVerb3_Manual.pdf
Page 3:
DEFEAT JACK
The DEFEAT JACK, located on the rear panel, bypasses the reverb signal and allows only the dry signal
at the outputs. Any SPST type footswitch (such as the reverb footswitch that sometimes comes with
amplifiers) will work for this function.
Viewing all 2 messages - View by pages of 10: 1
There are 2 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum
