Plans to build a 2 X 10" Midrange & High Frequency Cabinet for playing out.
2 X 10" Mid/High cabinet for use with Bass-bins for systems up to 500 Watts.
Here's a simple 2 way mid/HF unit you should be able to knock up in an day with some care. Don't use this with more powerful systems/amps.... this unit is for up to 500 Watt passive systems.... (Go for the 2 X12" mid-cabs for an active system).
These are piss-simple and ideal to go with the Folded bass-bins listed back at the main page... These and the bass-bins should give plenty of poke for venues like small clubs, bars etc.....
Check with the speaker supplier for the cross-over you need.... One at the front end to filter the incoming signal, and another to bridge to the tweeter.
LOUDSPEAKERS | 2 x 10" MIDRANGE BULLET TWEETER with associated cross-over |
PERFORMANCE | Frequency response from 400 Hz to 20 KHz and sensitivities from 99 db to 104 db related to the speaker models selected |
CONSTRUCTION | Fairly simple. easy-peasy mate |
MATERIALS | 1/2 sheet of X 18mm / 3/4" 8' X 4' board (2438 X 1219) |
VOLUME | Total= 8800 cubic inches Reflex= 6650 cubic inches, 106 litres |
RESONANCE OF LOUDSPEAKER | PORT AREA |
---|---|
40 HZ | 10 sq inches |
45 HZ | 12 sq inches |
55 HZ | 24 sq inches |
60 HZ | 33 sq inches |
[plans will print out to an A4 page]
(very important to read this !!)
Good luck with it! - Happy building!
I can tell your site is going to help me. However one thing I was hoping to see was an inner structure. Like perhaps looking down on one of your speaker cabs with no top. Of course they are simple enough. If you could help Im trying to find plans to build a duel 18" sub with a reversed speaker. If you have any ideas Id like it. Thanks
I put three score because I dont visit any other sites. Best stay nutral ya know.
I can tell your site is going to help me. However one thing I was hoping to see was an inner structure. Like perhaps looking down on one of your speaker cabs with no top. Of course they are simple enough. If you could help Im trying to find plans to build a duel 18" sub with a reversed speaker. If you have any ideas Id like it. Thanks
I put three score because I dont visit any other sites. Best stay nutral ya know.
test add comments to '2x10 & hf cab' page
sorry.... fixed the plan... it is now correct
Hi can you help me please with sending me a plan of a cab
for an 18" speaker ?
If yes ,please the type of cab must be a bass bin and frequency respone between0hz and 300hz.
It is important to me that the freq response ,that is0hz to 300hz, must be over 100db.
Thank you.
Regard your construction it seen quite good.
The link to the plans for the 2x10 mid/hi brings up
plans for the full range cab! Other than that tho,
gr8 site! Any chance you could put up zips of the full
plans for each cab in html, as this 'puter locks up
when I print from netscape! (then I could print it
straight off on a friend's computer whilst not running
their fone bill up!
Thanxx a lot M8
Cya l8rz...
-DJ Panic
testing...1.....2......3......
hi, looking at the plans and then at the special notes and dont understand cos i cant see a port hole but there are notes here which suggests there are?
There seems to be a problem with the construction link
Read 9 comments
Add review/comment